Высококачественный литой нейлоновый стержень, пластиковый полимерный полиэтиленовый стержень PA6
- Category: Plastic Rods >>>
- Supplier: Dezhou Hongyue Composite Material Co. Ltd.
Share on (62071142818):
Product Overview
Description
Product Description
Product name: MC black (with glass fiber) nylon rod
Product process: casting
Product color: black, other colors can be customized
Tolerable temperature: -40°C-195°C
Product features: high toughness, good flexibility, fatigue resistance
Product process: casting
Product color: black, other colors can be customized
Tolerable temperature: -40°C-195°C
Product features: high toughness, good flexibility, fatigue resistance
name | MC black (with glass fiber) nylon rod |
Plastic material | PE,UPE,MC Nylon,PP,PA,POM,PTFE,etc. |
color | White,black,or as your requirement |
Diameter | 5-200mm,or customized |
length | 500mm,1000mm,1500,2000mm, etc. |
Shape | Sheet, rod, tube, gear, rack,pulley, guide rail, Plastics fittings,and so on |
Free Sample | Yes |
Packing | Plastic bags,Cartons,Wodden case,Pallet,Container,ect. |
Main features :
High mechanical strength, stiffness, hardness, toughness, good aging resistance, good mechanical damping ability, good sliding Performance, excellent wear resistance, good machining performance, when used for precise and effective control, no creeping phenomenon, anti-wear
Good performance and good dimensional stability.
High mechanical strength, stiffness, hardness, toughness, good aging resistance, good mechanical damping ability, good sliding Performance, excellent wear resistance, good machining performance, when used for precise and effective control, no creeping phenomenon, anti-wear
Good performance and good dimensional stability.
Bar specifications, diameter Φ30-Φ500, length about 700 mm, can make round cakes with a maximum diameter of 1500mm, and can be used for various special-shaped pieces.
Pipe specifications, outer diameter Φ45-Φ500, inner diameter minimum 15 or more, wall thickness 10mm or more, length 1050mm and 1240mm two kinds, diameter larger than 500mm needs to be made separately
Pipe specifications, outer diameter Φ45-Φ500, inner diameter minimum 15 or more, wall thickness 10mm or more, length 1050mm and 1240mm two kinds, diameter larger than 500mm needs to be made separately
Diameter* Length | Diameter* Length | Diameter* Length | Diameter* Length | Diameter* Length | Diameter* Length |
8*1040mm | 10*1040mm | 12*1040mm | 15*1040mm | 18*1040mm | 20*1040mm |
25*1040mm | 30*1040mm | 35*1040mm | 40*1040mm | 45*1040mm | 50*1040mm |
55*1040mm | 60*1040mm | 65*1040mm | 70*1040mm | 75*1040mm | 80*1040mm |
85*1040mm | 90*1040mm | 95*1040mm | 100*1040mm | 110*1040mm | 120*1040mm |
130*1040mm | 140*1040mm | 150*1040mm | 160*1040mm | 170*1040mm | 180*1040mm |
190*1040mm | 200*1040mm | 210*1040mm | 220*1040mm | 230*1040mm | 240*1040mm |
250*1040mm | 260*1040mm | 270*1040mm | 280*1040mm | 290*1040mm | 300*1040mm |
Use of cast nylon rod:
The product has a wide range of uses. It is a good material that replaces steel, iron, copper and other metals with plastic, and is an important engineering plastic; casting type
Nylon widely replaces the wear-resistant parts of mechanical equipment, and replaces copper and alloys as the wear-resistant parts of equipment. Suitable for production
Wear-resistant parts, transmission structural parts, household appliances parts, automobile manufacturing parts, screw preventive mechanical parts, chemical Mechanical parts, chemical equipment. Such as turbines, gears, bearings, impellers, cranks, instrument panels, drive shafts, valves,
Blades, screw rods, high-pressure washers, screws, nuts, sealing rings, shuttles, sleeves, sleeve connectors, etc.
It can be used normally from 40 ℃ temperature to minus 195 ℃ high temperature
The surface particles are uniform and the impurities are less than 2%, which is almost invisible to the naked eye
Pure color, all aspects of performance can meet your requirements
Company Profile
Dezhou Hongyue Composite Materials Co., Ltd. is located in the Economic Development Zone of Dezhou City, Shandong Province, The company was formerly the first chemical plastics factory in Texas. It is one of the earliest companies engaged in composite materials, engineering plastics, rubber and plastic products.Company's main products: POM, MC Nylon, Oil Nylon, HDPE, ABS, PBT, PET, PVC, PC, PU, PP, PTFE, PVDF, PEI, PSU, PPS, PEEK, PAI, PI, PBI.
Our company wide range of accessories processing conditions, such as mass customization production ability, exquisite
manufacturing technology and advanced production equipment, professional technical advice and after-sales service of
products.Companies strictly enforce the ISO9001 (2008) international quality certification system, the product quality conforms tothe RoHS standard.
Certifications
Packaging
Packing Details : Inner plastic bag,outside carton box,last is the pallet,all are based on the customers' requirments
Delivery Details : 10-30 days after you confirm the samples
Payment terms: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.If you have another question, pls feel free to contact us.
FAQ
1. Q: Are you trading company or manufacturer ?
A: We are manufacturer.
2. Q: How long is your delivery time?
A: According to the difficulty and quantity of product processing,a reasonable arrival time will be given to you. Usually 2-5
daysfor CNC machine processing parts. It will take around 2-4 weeks for mold making.
3. Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
4. Q: Can you do assembly and customized package for us?
A: We have an assembly factory and can assemble all kinds of plastic, metal and electronic parts for you. For the finished
products,we can customized the retail package and you can sell it directly after receiving them.
A: We are manufacturer.
2. Q: How long is your delivery time?
A: According to the difficulty and quantity of product processing,a reasonable arrival time will be given to you. Usually 2-5
daysfor CNC machine processing parts. It will take around 2-4 weeks for mold making.
3. Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
4. Q: Can you do assembly and customized package for us?
A: We have an assembly factory and can assemble all kinds of plastic, metal and electronic parts for you. For the finished
products,we can customized the retail package and you can sell it directly after receiving them.
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
