MOP MET KET 3 in 1 combo urine rapid test strip / cassette

How To Use ?

For Strip 

1.When you are ready to begin testing, open the sealed pouch by tearing along the notch. Remove the test from the pouch.                                    

2. Immerse the strip into the container with the arrow end pointing towards the container. Do not immerse past the MAX (maximum) line. Take the strip out after 8-10 seconds and lay the strip flat on a clean, dry, nonabsorbent surface       

3.Wait 3-8 minutes and read result. Do not read results after 8 minutes.

For Cassette

1.Review “Specimen collection” instructions. Test device, patient’s samples, and controls should be brought to room temperature (20-30℃) prior to testing. Do not open pouches until ready to perform the assay.

2.Remove the test device from its protective pouch (bring the device to room temperature before opening the pouch to avoid condensation of moisture on the membrane). Label the device with patient or control number.

3.Hold the dropper vertically and transfer 3 full drops of urine (approx. 0.15ml) to the specimen well (S) of the test device, and then start the timer. Use a separate pipette and device for each sample or control.

4.Read result between 3 to 8 minutes after the addition of samples. Do not read result after 8 minutes.

How To Read ?

Positive: Only one pink band appears on test region of the Cassette.

Negative: Two pink bands appear on test region of the Cassette.

Invalid: If without colored band appears on test region, this is an indication of a possible error in performing the test. The test should be repeated using a new device.