Polyforte Concrete Coloring agent Coloring hardener oil based coloring

 The Oil-based Coloring Agent product could be easily applied in two main steps to achieve a pretty color viewing. The good permeability allows color to penetrate deep down into surface, and enables the coloring be long-lasting.

Treatment

Coloring
1. Before start coloring. be sure that the surface is sufficiently dry and finely grinded.
2. Decide a coloring method either(1)spraying, or(2)using cotton mop to spread.
3. Color the first layer on surface for the first time. If the coloring agent is not painted evenly,
or the color is light, should add more by mopping or spraying.
4.Apply the second coloring layer when the first layer is dry. The time between should not be
less than 4 hours.
5. When the second coloring layer is completely dry, use lapping machined to polish and re
move residuals (The accompanied sponge grit disk should be higher than 3000-grit). The
surface should be polished twice in horizontal and vertical directions. At last, remove dust
by clean, dry mop.

Color fixing
1.Spray the color-fixing agent, afterwards dropping water on the surface.
2. When the surface is dry, dry-polish with 1000 to 2000-grit till the surface is fine. (Do
not polish with water)
3. Wash the surface by scrubber with white pad in water.
4. Once the surface dries, apply the Lightening Agent(P9B08)on the surface, and polish
1-3 times by high-speed polishing machine equipped by 3# pad.

Attention: The surface should not contact with water after coloring and crosslinking
steps, but only when coloring - fixing step completes.

 22Kg/barrel