Allow the test and the specimen to equilibrate to room temperature prior to testing.
1. To begin testing, open the sealed pouch by tearing along the notch. Remove the test kit from the pouch and use it as soon as possible.
2. Lay the device flat on table. Fill the urine dropper with urine and hold the dropper vertically to add 2-3 full drops of urine to sample well “S” as arrow indicated.
3. Wait for red colored bands to appear. The test should be read in approximately 5 minutes. Do not interpret results after 5 minutes.
Negative: Only one red color band appears in the control region. No apparent band in the test region.
Positive: Two distinct red color bands appear in the control and test regions. The color intensity of the test bands may vary since different stages of pregnancy have different concentrations of HCG hormone.
Invalid: No line appears in the control zone “C”, the test should be voided since an improper test procedure may have been performed or deterioration of reagents may have occurred. This is due to the internal control built in which a distinct control region (C) line should always appear. Repeat the test using a new device. If the problem persists, discontinue using the test kit immediately and contact your local distributor.