Powder Paint for Iron Epoxy Fluorescent Green Plastic Coating Furniture Paint Building Coating

Product Overview

Description

Powder Paint for Iron Epoxy Fluorescent Green Plastic Coating Furniture Paint Building Coating

The colors you see will vary depending on the display, but we will customize the color according to the Ral color card.

 

According to the RAL or PANTONE color code

any colors you can choose from Topeasy Industry

 

 

 

Powder Paint for Iron Epoxy Fluorescent Green Plastic Coating Furniture Paint Building Coating

Brief description:

Mainly made of high molecular weight epoxy resin and amine series curing agent.

Features:

1, excellent adhesion, impact resistance and surface hardness, toughness, adhesion and other mechanical properties are excellent

2, high gloss, high leveling, good performance of the film

3, good chemical and corrosion resistance

4, good electrical insulation performance

5, can not be used for outdoor occasions

 

Mainly used for: corrosion resistance and chemical resistance: steel, water pipes, valves, cylinders, appliances, automotive parts and Building steel structure; electrical insulation products; electrical equipment, instrument housings, electronic rotors, etc.; furniture, shelves, Office supplies, security doors, safes, industrial equipment, fitness equipment, etc.

 

Available in standard and low temperature curing

        Can be made into a variety of glossy and colorful colors: A-type highlights (greater than 85%), B-type flat light (50%-85% or less), C-type matte (25%-50%), D-type semi-matte (10 %-25% or less), E-type matte (10% or less). The specific gloss color is subject to the user's designation; it can be made into a variety of fine art texture products such as sand, wrinkles, netting, cotton, hammer, moire, point spread, anti-stone, metal powder, antique copper.

 

Application condition

Pure epoxy powder coatings are available for the following equipment:

1. High-voltage electrostatic spraying

2. Friction and electrification spraying

3. Electrostatic fluidized bed

Coating thickness: 40-150 microns, recommended film thickness 50-80 microns

Average coverage: 10-12 square meters / kg, film thickness 60 microns (calculated at 100% usage)

Bake curing conditions: 120 ° C -150 ° C, 30 minutes 180 ° C, 15 minutes

Film properties: All tests were carried out using a 0.8 mm thick degreasing and rust-removed cold-rolled steel sheet with a film thickness of 50-80 μm.

 

Powder physical properties

      Specific gravity: 1.4~1.8g/cm3 (depends on formula and color)

      Particle size distribution: varies depending on the application, the standard type is an average particle size of 35-40 microns, less than 10 microns powder no more than 10%, greater than 90 microns powder no more than 0.5%.