Newest Plasma Pen Eye Lift Beauty Instrument,Nevus Removal Sweep Spot Pen
- Category: >>>
- Supplier: Shijiazhuang Aosai Technology Co. Ltd.
Share on (62158591441):
Product Overview
Description
Product Description
Product name | Portable home use maglev spot mole removal pen |
Environment temperature | 45%-77% |
Atmospheric pressure | 70kPa-106kPa |
Adapter power | AC220V±22V, 50Hz±1Hz |
Single frequency | 1.1MHz±0.3MHz |
Maximum output power | no less than 10W |
Maglev plasma pen is similar to carbon dioxide (CO2) laser beauty machine, it uses new generation of plasma micro district discharge technology with low temperature and high frequency , which is efficient capacity conversion material and chip control .
What does plasma pen can do for you?
Skin beauty: verruca vulgaris, senile warts, flat wart, contagious soft wart, verrucous nevus, and sebaceous nevus,granuloma,millet papules, eyelid xanthoma, leather fat, all kinds of pigmented nevus, corns and calluses, freckles, etc.
Advantages:
-Remove completely: instantly eliminate skin neoplasms and strong sterilization and never relapse
-No bleeding: can avoid various lesions caused by bleeding and medical risk
-Wound easy to recover without bandage
-No scar left
-Ease use: it can work for about 2-3 hours after 1 time charge.
-Economical and practical: it is cheap and needle can reuse.
-Easy to take
What does plasma pen can do for you?
Skin beauty: verruca vulgaris, senile warts, flat wart, contagious soft wart, verrucous nevus, and sebaceous nevus,granuloma,millet papules, eyelid xanthoma, leather fat, all kinds of pigmented nevus, corns and calluses, freckles, etc.
Advantages:
-Remove completely: instantly eliminate skin neoplasms and strong sterilization and never relapse
-No bleeding: can avoid various lesions caused by bleeding and medical risk
-Wound easy to recover without bandage
-No scar left
-Ease use: it can work for about 2-3 hours after 1 time charge.
-Economical and practical: it is cheap and needle can reuse.
-Easy to take
How to use the maglev plasma pen?
1. Clean face,apply the anesthesia
2. Sterilize face
3. Needle disinfect ( needle immerse in disinfectant for 5-10 minutes)
4. Do treatment ( we have videos to show you how to operate)
5. After treatment, if needle have any carbide, use knife scrape it or sand paper rub it.
6.Needle should be disinfected before use .
Use operation:
1.Insert the needle to the machine .
2.Connect the power adaptor to the machine .
3.Press ON/OFF button for few seconds .
4.Adjust the power and the frequency the machine .
5.It is ready to use when the power button blinks by pressing ON switch again .
6.It will stop and activate if you press or release "SHOT" button .
7.After procedure , press the "ON"button few seconds to stop .
8.Move left to right rather than stay on the spot while using the Tip.
9.Use short touch several times rather than one long touch while using the Tip
1. Clean face,apply the anesthesia
2. Sterilize face
3. Needle disinfect ( needle immerse in disinfectant for 5-10 minutes)
4. Do treatment ( we have videos to show you how to operate)
5. After treatment, if needle have any carbide, use knife scrape it or sand paper rub it.
6.Needle should be disinfected before use .
Use operation:
1.Insert the needle to the machine .
2.Connect the power adaptor to the machine .
3.Press ON/OFF button for few seconds .
4.Adjust the power and the frequency the machine .
5.It is ready to use when the power button blinks by pressing ON switch again .
6.It will stop and activate if you press or release "SHOT" button .
7.After procedure , press the "ON"button few seconds to stop .
8.Move left to right rather than stay on the spot while using the Tip.
9.Use short touch several times rather than one long touch while using the Tip
Packing & Delivery
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
