New Arrival Anti lost Car Alarm GPS Tracking Device

Specifications:

1. This is the only similar products of all mobile phones on the map to view the query to the location and computer platform position trajectory

2. In the first base station positioning on the basis of the original joined Google maps positioning, greatly reduces the error range of the product.

3. Due to the joined Google positioning mode, the product positioning function now support abroad.

4. This product does not need to cost platform, life-long free of charge. Just send a message to the alarm locator, simple operation, one pace reachs the designated position.

5. This product built-in powerful magnet adsorption function, the magnet will automatically adsorption, more convenient installation you put the position

6. This product is the only market with the function of charge automatically boot, connect the power supply, when the alarm locator electricity used up and products after shutdown, call the product will be automatically switched on and continue to recharge, warning, charging must insert SIM card

7. Basic parameters: spectrum GSM850/900/1800/1900 MHZ

8. Supported countries: China, Britain, France, Germany, Netherlands, Italy, Spain, Brazil, Portugal, Denmark, Russia, Poland, Turkey, Hungary, Thailand, Indonesia, Malaysia, Vietnam, Myanmar, Pakistan, Iraq, Saudi Arabia, Greece the Kazakhstan, Mongolia, Dubai, etc...

Instructions: 
1. Preparation: a SIM phone card and mini memory card, 
2. Power on: Open the card cover Insert the SIM card according to the instructions, insert the mini memory card, the product will automatically turn on the red light flashes 4 times off, 30 seconds into the normal standby state. [Note that if you do not read the memory card to re-insert] 
3. Indicator: Power on indicator light 4 times off, low battery indicator flashing 
4, bind the main control number; edit the text message sent by the mobile phone 000 to the alarm locator number, and later the local reply to a cell phone message; Set; binding + master number 
5. Separate recording; use cell phone to edit message 555 to the alarm locator number, then the machine to reply to a cell phone message; [Snd; recording has begun] 
6. Voice-activated dial-back; use the phone to edit text messages 666 sent to the alarm locator number, and later the machine replies a text message; [DT; voice monitoring has been successfully set up, alarm call-back]. 
When the sound around the alarm locator is greater than 40 dB, the alarm locator will automatically call the preset phone number. 
7.GPRS positioning query: edit text message 777 to the alarm locator number, and later the phone back a native Chinese location and Google Maps link, the phone will open the link will appear after the location map and text address description, so that Location more accurate. 
8. Sound around the product: Directly dial the number of the alarm locator card, after a few seconds to get through the alarm locator can hear the sound (query alarm locator itself does not make any sound and light) 
9. Locate tracking query; use mobile phone to edit the message sent to the alarm locator number 102, then the machine back to the phone a [account, password], visit the site http; // gpsui.net 
10. Positioning tracking from time to time; in the computer platform can be operated. 
11. Delete the contents of the memory card; use the phone to edit the message 445 sent to the alarm locator number, and later the machine to reply to the phone a [TF, cleaning success, currently available capacity] 

12. Host status; use the phone to edit the message 888 sent to the alarm locator number, then the machine back to the phone a message; [host all the features on or off the battery capacity binding number, signal strength, power frequency, GPRS TF card Capacity, etc.]. 

13. Restart the host; use the phone to edit SMS 999 sent to the alarm locator number, wait 1 minute to restore success. 
14. Turn off, the information above have the remaining power of the display stop function; use the phone to edit the message 444 sent to the alarm locator number, and later the machine back to a cell phone, [Reset; all tasks have been canceled.

 We accept 30% advance payment,70% balance paid before shippment via T/T,WEST UNION,PAYPAL,and TRADE ASSURANCE.

Shenzhen Miracles Technology Co., Ltd. Is covered in R&D, manufacture, marketing 3C electronic products and intelligent wearable devices. Our 3C electronic products include, intelligence usb cable connector, phone peripheral accessories like phone case,Bluetooth earphone etc., and smart wearable devices include Bluetooth watch, smart bracelet. we get popular with our clients among the 3C electronics and intelligent smart watch industry.

Q 1:Do you have MOQ ?
A: Yes,common models is 100pcs,customized model usually is 5000pcs.

Q 2:What is the lead time?
A:Sample time 1-3days,mass production time 4-5 days for qty below 2000pcs

Q 3:Can we print our logo on the product?If yes,what we have to offer ?
A: Yes,achieved by Silkscreen printing,full color printing ,digital printing,Laser etching etc.Need your logo of AI,EPS Or PDF format.

Q:4.Could I have a  sample or even production smaple before confirm bulk orders?
A:Yes,both could be provided but freight should be charged

Q:5.If I don't like the color of the stocking,may I change it?
A:Yes,we could customize the color based on you Pantone Code have to be charged extra

Q:6.How should I know my order is start and tracking my parcels?
A:We will take photos at each production procedures for you checking the state of order,once dispatched tracking number provided,and keep an eye it also.

Q:7.What's your company quality standards?
A:All raw material adopt environmental style,any quality products would be refused to shipping by our strict QC team.

More FAQ is please try not to hesitate to talk with us directly.

How to contact us ?

Just send an inquiry to us for further details,your any requests would be responsed within 1hours by Email,10Minutes by TM.