Li Ion Charging Three heating levels heating pad for garment heating system

Working procedure:

1. Long pressing for 2 seconds to switch power on or off;

2. Short press button to change temperature setting;

3. Illuminating LED color represents the selected heat level.

How to operate:\t\t\t

Step 1:\tPlug into battery pack, long press switch button for 2 seconds to turn power on (red blue and green will blink once), set to 5-minute pre-heat mode (LED light in red, 100% output), during pre-heat mode also can press button to change temp. Level. After 5-minute pre-heat mode, go down to second output(LED in blue, 75% output) automatically.\t\t

Step 2:\tShort press switch button to change temp. level:\t\t

\tLED in RED - 100% (High)\t\t

\tLED in BLUE - 75% (Medium)\t\t

\tLED in GREEN - 50% (Low)\t\t

Step 3:\tLong pressing switch button to turn power off.\t\t

The characteristics of enamelled alloy heating wire

1. Spectral radiant match good absorption performance, the long-term use of rediation performance unchanged, electrothermal conversion efficiency is high, saving about 30% energy than the general heating element.

2.Enamelled alloy wire bending resistance is high, and it has long service life.

3.Enamelled alloy wire heating up fast, positive temperature coeffient, high temperature resistance, corrosion resistance, good thermal chemical properties, high dielectric strength.

Manufacture alloy wires by ourselves

Our another company Jiangyin Chengxin Alloy Material Co.,Ltd manufacture resistance alloy wires for 20years.

It provide alloy wires to SENPHUS, so the cost and the quality of the the products can be controlled from alloy wires to other heating products. 

Please contact:

E-mail: amanda at senphus.com

Tel: +86-18706122853

Skype: amanda199256

Wechat: Amanda597190567