Двухкомпонентная прозрачная эпоксидная смола для пола с 3D рисунком для столешниц, напольных покрытий

The art solvent-free floor paint is a two-component under room temperature cure coating. Component A is an epoxy resin; component B is a solventless epoxy curing agent. It has the function of infiltrating and attaching to the lacquer surface to form a protective layer. The surface shines with crystal-like bright and lustrous luster. The glittering effect is soft and the enamel is charming. Widely used in floors, walls, countertops, etc.

Product Features

Dry at room temperature, high hardness of solidified material, good leveling, high gloss, high transparency, excellent graphic expression, beautiful appearance, wear resistance and easy cleaning.

Applicable place

Used in high-end shopping malls, restaurants, amusement parks, hotels, cafes, home improvement and museums.

Technical Parameters
The state in the container is evenly mixed after mixing, no hard block
Density, g/ml 1.09
Surface dry time, ≤ 6h
Complete dry time, ≤ 24h
Hardness, ≥ H
Adhesion, ≤ 0
Slip resistance (dry friction coefficient), ≥ 0.50

Water resistance 172h
Abrasion resistance (750g/500r) / g, ≤ 0.060

Treatment

1. It is recommended to use the smear method;
2. Component A and component B are mixed at 2:1 before construction, and fully stirred and then applied.
3. Construction should be carried out at a surface temperature of 10 °C or higher.
4. With the use, the two-component mixed paint should be used up within 40 minutes.
5. The application between the two coatings is to be carried out after the lower layer is completely dried. The coating interval is recommended after 24 hours.

Safety Precautions
1. Avoid contact with skin and eyes. If the topcoat comes into contact with the skin, apply warm water or a suitable cleaning agent. If the topcoat comes into contact with your eyes, rinse with plenty of water and seek medical attention immediately;
2. Ensure good ventilation;
3. When using the topcoat, keep away from sparks and prohibit smoking in the immediate vicinity;
4. Obey all health and safety regulations on site.

Storage
Store at least 5 months at 5-35 °C and prevent freezing during storage. Exceeding the storage period should be checked before passing. Store in a dry, cool place away from heat and sources of ignition.

15kg/group A:B= 2:1