Testsealabs One step rapid test Urine or Saliva AMP Amphetamine rapid test kit Drug of Abuse Rapid Test

Product Overview

Description

AMP Amphetamine  rapid test kit 

The One-step Amphetamine Test is a lateral flow, one-step immunoassay for the qualitative detection of amphetamine in human urine at a cut-off of 1000ng/ml. This product is used to obtain a visual, qualitative result and is intended for professional use. The assay should not be used without proper supervision and is not intended for over the counter sale to lay persons.

This assay provides only a preliminary analytical test result. A more specific alternative chemical method must be used in order to obtain a confirmed analytical result. Clinical consideration and professional judgment should be applied to any drug of abuse test result, particularly when preliminary positive results are indicated.

Strip

1.When you are ready to begin testing, open the sealed pouch by tearing along the notch. Remove the test from the pouch.                                    

2. Immerse the strip into the container with the arrow end pointing towards the container. Do not immerse past the MAX (maximum) line. Take the strip out after 8-10 seconds and lay the strip flat on a clean, dry, nonabsorbent surface (e.g., mouth of the serum container).         

3.Wait 3-8 minutes and read result. Do not read results after 8 minutes.

Cassette

1.Review “Specimen collection” instructions. Test device, patient’s samples, and controls should be brought to room temperature (20-30℃) prior to testing. Do not open pouches until ready to perform the assay.

2.Remove the test device from its protective pouch (bring the device to room temperature before opening the pouch to avoid condensation of moisture on

the membrane). Label the device with patient or control number.

3.Hold the dropper vertically and transfer 3 full drops of urine (approx. 0.15ml) to the specimen well (S) of the test device, and then start the timer. Use a separate pipette and device for each sample or control.

4.Read result between 3 to 8 minutes after the addition of samples. Do not read result after 8 minutes.

How To Read ?

Positive: Only one pink band appears on test region of the Cassette.

Negative: Two pink bands appear on test region of the Cassette.

Invalid: If without colored band appears on test region, this is an indication of a possible error in performing the test. The test should be repeated using a new device.