TCT band saw blade for cutting cellul glass

Factory sell High Quality padauk Cutting Carbide wood band saw blade 

Length : 3750mm / 4270mm/4300mm/4760mm/5200mm/5500mm/6210mm/7010mm/8350mm/9650mm...

Width: 16mm/19mm/27mm/30mm/35mm.40mm/50mm/55mm/60mm/65mm/70mm/80mm/90mm/100mm/125mm/150mm...

Thickness : 0.8mm/0.9mm/1.05mm/1.25mm/1.5mm...

Teeth space :T16mm/T18mm/T20mm/T22mm/T25mm/T28mm/T30mm/T32mm/T36mm/T38mm/T40mm/T45mm/T50mm..

Using : for cutting red wood , hard wood/rare wood/cedar etc

To press and tense saw blade while repairing saws .
To keep the saw road by pressing and setting the saw teeth .
To choose the right saw teeth by the cutting material thickness .
To keep the saw blade sharp by grinding the teeth while in use .

Cutting some logs with large cross-section,different materials of band saw applies to different customer groups ,and we can adjust the hardness of band saw applying to the different using repuirments for the better tenacity and strong wear resistance.Performance with the best flatness . perfect straightness,good stability,easy cutting and better trimming,is the most sffective and economical cutting toolfor the logs.Best cutting saw blade for the manufacturing with the high fatigue resistance at the high speed,low cost loss and good efficiency .

Use for Vertical band sawing machine

Use for horizontal band sawing machine

How to Choose the Right Bandsaw Blade 

Step 1 - Choose a Product: What Type of Bandsaw do you Have?
METALCUTTING BANDSAWS: Use Carbon Tool Steel or Bimetal Blades
WOODCUTTING BANDSAWS: Use Carbon Tool Steel, Premium Gold Carbide, or Specialty Resaw

Step 2 - Choose a Width: How Tight do you Need to Turn?
Horizontal metalcutting bandsaws are typically designed to use only one width of blade. Vertical metalcutting bandsaws and woodcutting bandsaws have the capacity to run a wide range of widths.

Step 3 - Bandsaw Blade Thickness
Choosing the proper thickness of the blade is important. Continual flexing and heating and cooling causes metal fatigue andultimately, failure.The thickness of the blade depends on the diameter of the wheels, and the work to be done. Thick blades withstand more cutting strain from straight cuts but will break more easily from the bending and twisting action. Thinner blades are recommended for lighter work. 

Step 4 - Choose a Tooth Pattern: What are you Cutting?
WOODCUTTING BANDSAWS: There is a wide range of what is considered correct for tooth patterns on a woodcutting

bandsaw. The general rule is that fewer teeth per inch provide a faster, but rougher cut; and more teeth per inch provide a smoother, but slower cut.

METALCUTTING BANDSAWS: The correct tooth pattern for metalcutting is determined by the thickness (cross-section) of material you are cutting.There should be between 2 and approximately 10teeth in contact with the material at all times.

Generally, choose fewer teeth per inch for thicker materials and more teeth per inch for thinner materials. 

 Step 5 - How Many Teeth?
(1) Getting a balance between a good finish and a decent feed rate are the two objectives in determining how many TPI or

teeth per inch you want to use. More teeth make a smoother but slower cut. Fewer teeth allow for faster cutting but with a slightly rougher finish. 

(2) For any kind of precision cutting,the rule of thumb is to always try to keep at least 3 teeth in the material at all times.

This adds stability and accuracy and applies to cutting in both metal and wood.
(3) Coarse tooth blades of 2 or 3 TPI should be used for re-sawing and thicker materials. For general wood cutting duties in typical 3/4″ material a range of between 4 TPI for coarse, fast cutting and 14 TPI for slower, smoother cutting. Something in the 6-8 range would be a good 'general purpose' blade. This same equation is applied whether you're cutting wood, or metal. An even finer 18 – 32 TPI tooth count should be used for thinner metals and plastics under 1/4″.

Service

* Inquiry and consulting support. 

* Small sample testing support. 

* View our Factory.

other Service

* We can also provide other custom blade . such as paper machine,splitting machine and wood working machine etc.

Products Name with link

91.8% Response Rate

Products Name with link

91.8% Response Rate

Products Name with link

91.8% Response Rate