Медицинская функциональная повязка, система ранотерапии отрицательным давлением, повязка, подходящая к NPWT аппарату, Размер 15*10*3 см, в наличии

Accessories List for NPWT dressing kit

product name] disposable Negative Pressure wound therapy dressing kit
[Model specifications]

Here is the size for black foam

5*5*3cm, 15*5*3cm, 10*7*3cm; 15*10*3cm,

20*10*3cm, 20*15*3cm, 25*15*3cm;  30*20*3cm, 

And other extra big size customed

The length of the tube: 30cm/60cm/180cm; diameter of tube: 4mm-6mm/10mm

The size of adhesive film: 30*20cm

[Scope of application]

Applicable to:

1, acute wounds,

2, chronic wounds and refractory wounds,

3, application of the affected area after wound transplantation,

4, ulcers, hemorrhoids.

[Usage] 

1. Thorough debridement and hemostasis. 
2. In the case of cleaning, open the sealed packaging bag, trim the drainage dressing into a shape consistent with the size of the wound/cavity, cover it on the wound surface or insert it into the wound cavity, and fix the number of needles on the edge intermittently, and put the drainage dressing on the dressing. The drainage tube is taken out from the normal subcutaneous tissue about 5 cm away from the wound/cavity or by the "membrane method", using straight through
Or the tee merges the multiple drainage tubes into one or two outlets. 
3, closed wound / cavity: the skin around the wound surface is clean and dry, with the adhesive film to seal the entire wound to the edge of the wound about 3cm ~ 4cm range. 
4. Connect the drainage tube to the negative pressure source, adjust the negative pressure to 125mmHg -200mmHg (0.017MPa~0.026MPa), shrink the dressing material, and have the liquid drainage. After 3-7 days of continuous drainage, take the drainage dressing and observe. If the wound is not clean, repeat the drainage dressing until the wound is clean.

[Precautions, warnings and instructions] 

1. Avoid contact with organic solvents such as alcohol. 
2. This product is discolored in the case of iodine, but it is normal and requires no special treatment.

3. It is recommended to use within 15 minutes after opening the inner packaging to prevent contamination and drying. If the product is dry, it can be used after being soaked in physiological saline under the condition of ensuring sterility.

4. This product can be used as a carrier for topical administration. This product does not react with antibiotics and silver ions. 
5, this product is a one-time use, can not be re-sterilized and used repeatedly, the package is printed with a one-time use symbol. 
6. The operation of this product must be carried out by medical personnel. 
7. If the package is damaged, it is strictly forbidden to use. 
8. After use, the product should be disinfected and destroyed according to conventional medical waste.

Clinical Cases:

Related medical wound dressing: 

  Hydrocolloid Oil Gauze Dressing                            Alginate Wound Dressing   

RainHome Medical
 

Guangzhou Rainhome Pharm & Tech Co., Ltd (hereinafter referred to as Rainhome) established in 2004, is a listed company. It’s a national high-tech enterprise, dedicated in the R&D, production and sales of medical biomaterials (part of national high-tech new materials).

Rainhome has insisted the initiative strategy since its establishment and continues investing and expanding to upscale its self-innovation capability. It was rated as high-tech enterprise and committee unit of medical device quality management committee of china quality association for pharmaceuticals in 2014. It’s renowned as trauma repair and treatment research base, belonging to engineering research center of healthy ministry for medical biotechnology in 2015. Rainhome was awarded as a unit of board of supervisors of Guangdong association for medical devices industry, and designated as scientific and technological achievement industrialization base for new medical materials, Guangdong engineering research center for medical material and rehabilitation nursing product, and Guangdong engineering research center for nature products and the development of new drugs in 2007. Rainhome established industrial technology innovation alliance for high-level functional medical dressings.

Rainhome has over 100 employees, constituting an all-round, high-educated engineering and management team. It has applied for more than 100 patents, and 31 authorized patents, including 5 invention patents, 21 utility model patents and design patents, owning 10 Guangdong high-tech products.
Currently, Rainhome’s main products include chitosan antibacterial film spray, disposal vacuum sealing drainage dressing, chitosan wound dressing and alginate dressing. Other products include disinfectant medical ultrasonic coupling agent, medical ultrasonic coupling agent for intestinal, Silicone gel sheet, saline nasal spray.

 Standard Package :Carton Package

1 Q: Where is your factory ?
A:Our factory located in 5 Floor,No.10 YongshengRoad,Yonghe Economic Region,Guangzhou City,   GuangDong Province,China.

2 Q: What are your main products?
A: Currently, Rainhome’s main products include chitosan antibacterial film spray, disposal vacuum sealing drainage dressing, chitosan wound dressing and alginate dressing. Other products include disinfectant medical ultrasonic coupling agent, medical ultrasonic coupling agent for intestinal, Silicone gel sheet, saline nasal spray.

Most important we have subsidiaryb which is manufacture the skin care items .So we are also capable of providing OEM ,ODM for Skin care industry.

3 Q: What is your production capability?
A: 
      Wound dressings 200,000 patches per day. 


4 Q:What is your MOQ for customerized packing goods?
A:First aid bandages MOQ: 1million pcs. 
      Medical tapes MOQ: 50000 rolls. 
      Wound dressings MOQ: 50000 patches. 
      Cooling gel patches, anti-mosquito patch MOQ:200,000 patches. 

For more details,we can discuss .
   

5 Q: How long is the delivery time of your goods? Where is the loading port?
A: 30~35days after 50 % T/T deposit received and all packing details confirmed. Loading port:Huangpu or others place in China according clients' requirement. 

6 Q:What is your payment term?
A:50% deposit by T/T in advance,50% balance before shipment after passing quality inspection

7 Q:What is the H.S. Code for your products?
A:3005 1090 00.

8 Q:Which kinds of certificates do you have for your products?
A: TUV-CE,TUV-ISO13485,TUV-ISO9001,GMP 

9 Q: How can we get a sample to check your quality?
A:After you pay the sample cost, the samples will be ready for delivery within 7 days. The samples will be sent to you by express and arrive within 3-4days.