Concrete Floor Grinding Machine Marble Polishing Machine Price
- Category: Concrete Grinder >>>
- Supplier: Henan Landao Machinery And Equipment Co. Ltd.
Share on (62277394180):
Product Overview
Description
Mainly used concrete floor grinding machine With 4 heads grinder ,
1. Make you work more 30%-40% efficient ,The labor cost be saved a lot.
2.Improve the compactness and surface smoothness of concrete which makes you more professional and competive
3.Operate more easily and relax.
Product Description
Technical Parameters
Epoxy floor grinding machine can effectively polished concrete surface and epoxy mortar layer and old epoxy floor, etc. The machine can be the old epoxy floor removal.
Features
Diamond head:The head use a lot of artificial diamond,due to the diamond is hard, sharp ,and wear-resistant. So the terrazzo machine have high efficiency, good quality and longer lifespan.
1.High efficiency: for coarse grinding efficiency, fine grinding
2, good quality: grinding floor flatness, good finish.
3, the cost is low: abrasive consumption cost is lower than ordinary terrazzo machine.
4, strong adaptability: terrazzo floor completely harden, still can work effectively.
5.can grind to mass
Mainly used for grinding of larger or middle range road. It can grinding concrete surface layer and epoxy mortar layer. Equipped power outlet for vacuum cleaner and the power cord of the vacuum cleaner can be connected directly to the grinder. Avoid the need for two power lines when working. You can polish the edge of dust, it can effectively polish the concrete surface to improve the adhesion of the material and the ground, while ensuring the ground flatness.
FAQ
1.The voltage must not be too low,must not be short of phase.
2.The grinding head should be pushed off the ground before using, then open adjustable button,when head is normal rotation,then lay on the ground gently.
3.The grinding head should rotate in direction of the arrow(right)
4.In the work, if you find that the speed of the grindstone slows down or the motor line is hot, check whether the power supply is too low.
5.If there is a power failure in the work, the switch should be put back in its original position,and the position of work that will be burn the motor.
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
