Cloth Belt 307EA uses proprietary microreplication technology by 3M where micron-graded aluminum oxide particles are formed into tiny pyramids of abrasive mineral and then coated on an X weight cloth backing. As these pyramids wear, fresh, sharp mineral is continually exposed to produce a consistent cut and a predictable, fine finish.
Built For Dimensioning and Scratch Refinement
The abrasive and resin structure for the Cloth Belt 307EA is formulated to break down under medium pressure and keep fresh, sharp mineral cutting to provide consistent finishes on hard metals such as carbon and stainless steel. Our belt also features a grinding aid that helps prevent heat buildup, warping and discoloration. The belt is constructed on an X-weight, durable cloth backing that helps provide control, conformability, and effective medium-pressure grinding. The resin bonded abrasive gives you greater heat resistance and helps prevent delamination.
The three-dimensional structures of abrasives contain multiple layers of mineral. As these pyramid-like structures wear, fresh, sharp mineral is constantly exposed to the workpiece, resulting in faster, more consistent cutting throughout the life of the belt.
Runs Smooth, Finishes Consistently
The belt uses a Film Media Splice, a strong secure bond joining the belt ends, consisting of a thin film-joining media that minimizes "chatter marks," ensures a smooth running belt, and consistent finishing results. When compared to conventional abrasive products, proprietary Trizact™ abrasives produce a finer finish, achieve results faster, and last longer.
Ideal for Robotic Finishing and Polishing
Robotic metal polishing demands the most consistent, refined cut and long abrasive life. 3M™ Trizact™ abrasives can consistently deliver near-mirror finishes while also delivering the abrasive life that helps reduce changeouts and downtime in robotic cells. This helps maximize the efficiency of the cell, allowing you to produce more parts per belt.
The Science of Flawless Finishes
Unlike conventional abrasives, our line of belts start sharp and stay sharp, resulting in more predictable finishes and improved, consistent quality. The belts can last up to five times longer than conventional belts and provide precise finish control such that operators can reduce grade sequences, requiring fewer process steps and fewer abrasive products. Three-dimensional structures uniformly distributed over the entire surface of abrasives ensure consistent performance and eliminate part to part variation.
1. Self-sharpening pyramids start sharp, stay sharp, and run cooler than conventional abrasives
2. Flexible backing for consistent finish over contours
3. Three-dimensional design enables very consistent finishes throughout the abrasive life in robotic applications
4. For intermediate finishing and fine polishing prior to plating or buffing
5. Ideal for intermediate finishing and fine polishing prior to plating or buffing
6. Produces finer finishes than conventional electrostatically coated abrasives
Abrasive sanding belt
Size can be customized, make to order
Resin over resin
Builders Hardware, Medical Instruments, Metal Fabrication, Metal Implants, Plating & Polishing, Plumbing Fixtures, Turbine Engines
Best for Finishing, Best for Stainless Steel Finishing
For use on
Aluminum, Carbon Steel, High Nickel Alloy, Soft Metals, Stainless Steel, Titanium/Zirconium