1km wifi range access point outdoor router wifi antenna repeater cpe
- Category: >>>
- Supplier: Zibo Zunzhi Trading Co. Ltd.
Share on (62290829474):
Product Overview
Description
Model | WQ-Q235 |
Frequency | 2.312~2.732GHz |
Chipset | QCA9535 650MHz |
PTP range | 1km |
Antenna gain | 8dBi |
Through out | 300Mbps |
Power supply | 24V POE/ DC 12V |
Antenna angle | 65 degree |
Why should you choose us? Our wireless CPE has these advantages below:
Failure warning. If the connection fails, the system will send a reminder.
Remote management. We can configure and manage devices(in one system) in one computer or laptop.
All devices will be preconfigured before delivery, so that you can install and use them easily.
And there is a button aroud LAN port, which can quickly set WQ-Q235 to AP mode or CPE mode. No need enter its interface.
WQ-Q235 is equipped with WQ-Link's own firmware, we regularly maintain and upgrade the firmware. This will ensure that our wireless CPE will run stably for a long time.
Its outer casing is made of ABS engineering plastic, not afraid of exposure, severe heat and cold. WQ-Q235 can run stably in a temperature of - 40 degree, It has IP66 protection. Both dustproof and waterproof.
WQ-Q235 supports both POE 24V and DC 12V power supply mehod, this makes it more adaptable to the outdoor installation environment.
2. 802.3af / at is compatible with standard POE power supply
3. Build-in hardware smart antenna system
The W-Q218 uses the WQ-Link firmware, which is easy to operate and you can easily learn to use it.
1. Self-developed operating system, easy to manage
2. Access point & Station mode
3. System log and kernel log
4. Operation condition monitoring
5. One key quickly pairing
6. Unified management
Product show
For example, there is network at place A and no network at place B, we can't choose wiring for various reasons. This WQ-Q235 can help you. At place A, WQ-Q235 works as Access point mode and as Station mode at place B.
Note: max PTP range is 1km
There are two methods for elevator wireless CCTV installation.
1) install WQ-Q235 up on the elevator and top of building, camera signal will be sent to the roof first. Collect all the signals on the roof and send them to the monitoring room.
2) install WQ-Q235 under the elevator and ground of the building.
