LED Decoder Canbus H7 9005 HB3 9006 HB4 H8 H11 LED Canbus Decoder Led Headlight Fog Light Error Free Warning Canceller Capacitor
- Category: >>>
- Supplier: Guangzhou Leadway Electronic Technology Ltd.
Share on (62293721500):
Product Overview
Description
LED Decoder Canbus H7 9005 HB3 9006 HB4 H8 H11 LED Canbus Decoder Led Headlight Fog Light Error Free Warning Canceller Capacitor.
What do they do ?
Are you having problems with your new led's flickering, flashing, showing bulb errors on your dashboard or one side not working?
What you need are load resistors......
On new cars manufactured after 2002 adopting the Can-Bus wiring system led's may show signs of problems i.e warning error, flickering , this is known to cause problems with Audi, BMW, Bentley, Porsche, Mercedes and other makes and models too.
Load resistors take the left over voltage and turn it into heat rather than light and solve the problems incurred earlier.
Advantages
100% brand new, high quality.
Lightweight and portable.
Durable and practical.
One LED resistor is required for each turn signal bulb or each license plate light bulb.on, Plug and Play.
Applications:
- Can be connected to turn signal light, to fix light problems
such as hyper flashing, no flashing or burnt out bulb indications.
- "Lamp Off Signal"/"OBC Error Message" Solution After Installing SMD LED Lamp.
- Solutions for fast turn signal flash response after installation of SMD LED bulbs.
- Can be used with LED turn light of cars
- Aluminium housing
- Excellent heat dissipation
- With wire at each end of the resistor, easy to install.
- Power: 50W
- Resistance:39ohm
- For 12 volts
- Type: One LED resistor is required for each turn signal bulb or each license plate light bulb.
Product Description
Aluminium housing
Good heat dissipation.
Fit Socket:H4 H7 H8 H11 9005 HB3 9006 HB4 LED.
Power: 50W.
Height: 21mm.
Length: 47mm.
50W Load Resistor DRL Fog Light Canbus Error Free Wiring Canceller Decoder
it will solve Your Auto Fog Light's Problems Such as hyper flashing, no flashing , burned out bulb or OBC error indications.
Package included: 2x 50W 6.8Ohm led canbus decoder.
Detailed Images
Product Installation
Note: If decoding is required, the lamp power cannot be greater than 50w.
it is the nature of the load resistor to get hot while in use so please do not affix to paint or plastic.
This Load Resistor will be VERY HOT as soon as you plug into the bulb.It
will work in high temperature and let you be away from error code on dashbord.Before installation,please pay attention as below:
1.Don't put the resistor in hands when you finish connection and light on the bulb.
2.Don't mount the resistor on plastic or material with low heat resistance.
Suggest mount on METAL Part.
Related Products
50W 3OHM 6OHM 8OHM 10OHM Load Resistor Controller Foglight Error Free Warning Canceller Capacitor Blinker led canbus decoder
Universal 12V Car ON OFF delay Intelligent LED daytime running light flasher module Wire Harness Dimmer Relay DRL controller
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
