Multi panel rapid drugtest urine drugs test kit
- Category: >>>
- Supplier: Hangzhou Laihe Biotech Co. Ltd. [Zhejiang China]Hangzhou
Share on (62296414067):
Product Overview
Description
Product Name | Multi-drug Urine Test Kit |
Format | Panel (Card) |
Test Item | Any combination of customized drugs AMP/BZO/BAR/BUP/COC/THC/MTD/MET/ MDMA/MOP/OPI/OXY/PCP/PPX/TCA/EDDP/TRA/K2 |
Cut-off | Common cut-off as form below |
Specimen | Urine |
Storage | 2-30°C |
Specification | 20 pcs/box 25 boxs/ctn |
Test | Calibrator | Cut-off (Customizable) |
d-Amphetamine | 1,000 ng/mL | |
Secobarbital | 300 ng/mL | |
Oxazepam | 300 ng/mL | |
Buprenorphine | 10 ng/mL | |
Benzoylecgonine | 300 ng/mL | |
Cotinine | 200 ng/ml | |
Fentanyl | 200 ng/ml | |
Synthetic Cannabis | 50 ng/mL | |
11-nor-Δ 9 -THC-9 COOH | 50 ng/mL | |
Methadone | 300 ng/mL | |
2-Ethylidene-1,5-dimethyl-3,3-dipheylpyrrolidine | 300 ng/mL | |
d-Methamphetamine | 1,000 ng/mL | |
d,l-Methylenedioxymethamphetamin | 500 ng/mL | |
Morphine | 300 ng/mL | |
Morphine | 2,000 ng/mL | |
Oxycodone | 100 ng/mL | |
Phencyclidine | 25 ng/mL | |
Propoxyphene | 300 ng/mL | |
Nortriptyline | 1,000 ng/mL | |
Tramadol | 100 ng/mL | |
...... | ...... |
Materials Provided
(1) Test panels (cards)
(2) Desiccants
(3) Package insert
Directions for Use
1. Remove the test device from the foil pouch and take off the cap under room temperature.
2. Immerse the absorbent tip into the urine sample for about 10 seconds. Urine sample should not touch the plastic device.
3. Replace the cap over the absorbent tip and lay the device flatly on a non-absorptive clean surface.
4. Read results at 5 minutes.
Interpretation of Results
NEGATIVE: *A colored line in the control line region (C) and a colored line in the test line region (T) for a specific drug indicate a negative result. This indicates that the drug concentration in the urine specimen is below the designated cut-off level for that specific drug.
*NOTE: The shade of color in the test line region (T) may vary, but it should be considered negative whenever there is even a faint colored line.
POSITIVE: A colored line in the control line region (C) but no line in the test line region (T) for a specific drug indicates a positive result. This indicates that the drug concentration in the urine specimen exceeds the designated cut-off for that specific drug.
INVALID: Control line fails to appear. Insufficient specimen volume or incorrect procedural techniques are the most likely reasons for control line failure. Review the procedure and repeat the test using a new test panel. If the problem persists, discontinue using the lot immediately and contact your local distributor.
