Tack Free Time (min)
Curing Speed (mm/d)
Elongation at break(%)
Hardness (Shore A)
Tear strength( N/mm)
Non-volatile contents Content (%)
Operation Temperature ( ℃)
Service Temperature ( ℃)
Shelf Life (Month)
Environmental no odour High tensile 6.5MPa PU adhesive for windshield windscreen bonding
--One component moisture curing polyurethane sealant-Primer-less
--Excellent bonding and sealing with many substrates like glass, aluminum plate, car body etc.
--Good elasticity and initial adhesion, No bubbles during application etc.
--No corrosion and pollution to substrates, environment friendly
--Paintable and polishable surface; Good aging and weather resistance
Car glass bonding
Bus glass bonding
Any contaminants on the pinch-weld will reduce adhesion of the urethane and the windshield.
You will want to cover any areas that were not sanded, and protect the inside of your vehicle using tape and sheets of paper or plastic.
The purpose of the primer is to open the molecules of the frit band to accept the urethane molecules.
The best thing for the new urethane to adhere to is the old urethane. It must be clean and free from dirt, oil or other contaminants.
Carefully align the top bottom and sides by sight. Set the windshield on top of the pinch-weld.
Follow manufacturer's instructions regarding safe drive away times.
Gross Weight: 10.25kg
1 cbm: 1080pcs
20ft Container: 33000pcs
Gross Weight: 17.4kg
1 cbm: 800pcs
20ft Container: 23000pcs
below 2000pcs 7-15days
OEM: 30-50days of first order
Samples: DHL, Fedex, TNT etc.
Cargo: By sea, by air, by railway etc.