24V 50V 15 45A BLDC MOTOR DRIVER BRUSHLESS DC MOTOR DRIVER
- Category: >>>
- Supplier: Jugetek Co. Ltd.
Share on (62322804775):
Product Overview
Description
Product Description
Features
HALL angle: 120°/240°
Compact and powerful
Excellent velocity control
Wide speed control range of 150-20000rpm
Speed regulation:0.5%max(with respect to load)
Easy operation with on board potentiometer
Speed setting via external analog or digital signals
Strong protection
HALL angle: 120°/240°
Compact and powerful
Excellent velocity control
Wide speed control range of 150-20000rpm
Speed regulation:0.5%max(with respect to load)
Easy operation with on board potentiometer
Speed setting via external analog or digital signals
Strong protection
Driver Paramters | Minimum value | Rated value | Maximum value | unit |
Output current | - | 8 | 16 | A |
Input voltage | 12 | 24 | 30 | VDC |
Hall drive current | - | 20 | - | mA |
Hall signal voltage | - | 5 | 5 | V |
Applicable motor speed | - | - | 20000 | RPM |
Electrical indexes
Environmental factors | Environmental indexes |
Use occasion | Avoid dust, oil stain and corrosive gas |
Operating temperature | 10℃~+50℃ |
Environment humidity | 40-90%RH (no condensation) |
Vibration | 5.9m/s2 Max |
Storage temperature | -20℃~+125℃ |
Cooling mode | Natural cooling or forced cooling |
Driver interface and motor connection
Signal | Terminals | Function |
Input | SV | 1.External potentiometer; 2.Input analog signal; 3.PWM pulse width. |
COM | Common port (0V reference level) | |
F/R | High level input the motor will rotates clockwise, low level input or when F/R and COM are connected, the motor will rotate anticlockwise | |
EN | High level input the motor will slowly stops, low level input or when EN and COM are connected, the motor runs | |
BRK | The motor brake stops when a high level is added or port suspension; the motor runs when the low level is added or EN and BRK are connected | |
Output | ALM | The fault output signal of the motor or drive is 5V under normal circumstances; the level is 0V when a fault occurs. |
SPEED | The output of speed is pulse frequency corresponding to the motor running. The terminal can be connected to upper computer |
Four speed regulation modes
Build-in potentiometer RV
Rotate the RV knobs clockwise until a “click” sound, the motor starts to run. Rotate the RV knobs clockwise, the motor will
accelerate. Rotate the RV knobs anticlockwise, motor speed will decrease, and the motor will stop until a "click" sound.
Build-in potentiometer RV
Rotate the RV knobs clockwise until a “click” sound, the motor starts to run. Rotate the RV knobs clockwise, the motor will
accelerate. Rotate the RV knobs anticlockwise, motor speed will decrease, and the motor will stop until a "click" sound.
External potentiometer
Use a suitable potentiometer with a resistance value of 10KΩ, connect middle terminal with SV terminal, and the other two
terminals are respectively connected with VCC terminal and COM terminal.
Use a suitable potentiometer with a resistance value of 10KΩ, connect middle terminal with SV terminal, and the other two
terminals are respectively connected with VCC terminal and COM terminal.
Input analog signal (0-5V)
Voltage and motor speed relational diagram(unloaded)
Voltage and motor speed relational diagram(unloaded)
Pulse Width Modulation
Duty radio and motor speed relatoinal diagram (unloaded)
Duty radio and motor speed relatoinal diagram (unloaded)
Quick brake
BRK and COM are connected in default, the motor will be quick brake, When BRK and COM are disconnected, the motor will rotate.
BRK and COM are connected in default, the motor will be quick brake, When BRK and COM are disconnected, the motor will rotate.
CW/CCW rotation
Connect F/R and COM, the motor will rotate clockwise, disconnect it, the motor will rotate anticlockwise.
Connect F/R and COM, the motor will rotate clockwise, disconnect it, the motor will rotate anticlockwise.
Peaking current setting
Equipped with a motor protection function, the driver provides options to set desired current number in the P-sv ,knob to avoid
over-current for motor. Please note that the random error is ±10% . The setting should be matched with motor rated current.
Equipped with a motor protection function, the driver provides options to set desired current number in the P-sv ,knob to avoid
over-current for motor. Please note that the random error is ±10% . The setting should be matched with motor rated current.
Mechanical Dimension
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
