LAVA CORE is the first-generation oil injector developed by BBELL Technology. This oil injector has integrated heating and oil injection as a whole. It adopts a special structure with internal central heating, which has higher heat transfer efficiency and faster heating. The larger oil suction port diameter makes it suitable for both thin and concentrated oils. It uses extremely simple oil suction and oil injection principles, and combines with clever structure, which makes operation very simple and injection more efficient, and saves time & labor costs.
SPECIFICATIONS FOR 25 TON CRAWLER EXCAVATOR
Engine
Rated Voltage
V
110
Rated Power
W
40
Heating temperature
℃
0-100
Size
Temperature controller
mm
170(L)*130(W)*90(H)
Filler
mm
25(L)*35(W)*15(H)
Heating Rod/Lead Wire
mm
⌀5*400/1000
Others
Capacity
ml
25/50
Gear
25ml
0.5/1/1.5/2/2.5ml
Gear
50ml
1.0/2.0/3.0/4.0/5.0ml
Main Features
1) Using internal heating rod for heating.
2) Design of larger oil inlet/outlet nozzle.
3) 360° transparent tube wall.
4) Suitable for thick and thin oil.
5) Easy to operate, Easy to carry.
Product Comparison
Tradition filling machine
The outside is blocked and the oil inside cannot be seen.
LAVA CORE
All round transparent tube wall is convenient for monitoring the status of oil in the tube at any time
Tradition filling machine
External heating,heating efficiency is poor
LAVA CORE
Using heating rod for heating can reach the set temperature only after several seconds and keep the constant temperature efficiency
Tradition filling machine
Small oil suction mouth,not suitable for thick oil
LAVA CORE
Design of larger oil nozzle makes the thick or thin oil pass easily.
Tradition filling machine
5.The material on outside handle is plastic
LAVA CORE
5.The material on outside handle is metal
Packing & Delivery
Packaging
Size
440*270*100mm
Weight
3.0kg
Packaging Details
The normal package is paper box(Size: L*W*H).If container is too tigher,we will use pe film for packing or pack it according to customers special request.
FAQ
(1)How it works?
Step1: Connect lead wire and screw cap to controller
Step2:Connect power line in the other side, switch on power buttons
Step3:Regulate temperature through button(Green number represents constant temperature and red number represents heating temperature)
Step4:Press release unit on top,hold up barrel and load up liquid by keep pulling the play until full loaded
Step5:Lift up filler and press handle to release air bubble
Step6:Install the needle piece and ready to fire
(2) Is it possible to put logo on the product? Re: Yes, putting your logo on the product is available. It depends on your requirement, different requirements results in different minimum order quantity.
(3) What's the warranty?
Re: We have 12 months warranty on it. If your items is broken, please contact the sales, the sales will cope with it immediately.
