Customized Ignition Switch LockSet for Motorcycle Scooter GY6 150CC

♥Conditon: 100% Brand New. 

♥Material: Aluminum. 

♥High class quality and very durable.
♥Its stylish design is perfect to decorate your motorcycle. 

♥High class quality and very durable Good Working.

【Step 1 – Position the Motorcycle】
Park your motorcycle on a flat, level surface with ample lighting nearby. Ideally, set up outdoors if the weather is clear or indoors with a lot of windows or bright lights. Be sure to have your tools close by. 

【Step 2 – Disconnect the Battery】
Before going any further with removing the ignition switch, you’ll need to disconnect your battery. Remove your rider’s seat to access the ignition area of your motorcycle and set it aside. Always start by removing the negative terminal wire lead before the positive terminal wire lead, never positive before negative or you could burnout or short circuit the battery. 

【Step 3 – Loosen the Pinch Bolts】
Loosen the two Allen head, pinch bolts that hold the upper triple tree to the front forks. This is also the large bracket directly above the handlebars. 

【Step 4 - Remove the Damper】
Remove steering damper next if your motorcycle has one. Unscrew the bolts that hold it up on the upper triple tree, but leave the opposite end of the steering damper attached to the frame. Simply just pivot it opposite the triple tree to move on. 

【Step 5 - Remove the Triple Tree】
Remove the 32 mm nut and washer that hold the upper triple tree to the steering stem, and then pull the upper triple tree and off the stem and fork.Then, trace the original wiring until you locate the connector in your motorcycle. Disconnect the connector by separating the ignition from its wiring harness.

Now you can remove the entire upper triple tree and ignition switch from your motorcycle and lay it down on a wide table. Make sure this area is free of clutter so you do not lose any small parts. It also helps to lay a white towel or sheet on the surface so any loose parts will stand out and be easy to see. 

【Step 6 – Remove the Ignition Switch】
Set ignition switch facing down and locate the two bolts that hold it to the underside of the triple tree. The ignition switch may be secured with either one-time use bolts or hex head bolts, but either way it must be removed with a bolt extractor tool.

Gently remove the ignition switch from the upper triple clamp. Finally, you can replace your old ignition switch with a new set and reverse these steps to re-install the device. 

          Go Kart Parts                             ATV/UTV Parts                                Scooter Parts                               Golf Cart Parts

         Motorcycle  Parts                           Bicycle Parts                             MINIBike Parts                       Customized Parts

      Taizhou Xinydd Machinery Co., Ltd. was founded in 2015. We located in Binhai Industrial Area, Taizhou, Zhejiang Province. We have professional engineers and management team in the producing of the clutches for U.S.A, Russian, Europe, Brazil, and other countries. We have enough ability to satisfy different requirements from yours in this field.Who could bring a lot of international experience and professional and an unparalleled level of service for you. 

Q1. How to pay?
A: TT, PAYPAL, WEST UNION, DP, DA, Credit card up to you.

Q2. What is your term of delivery?
A: EXW, FOB, CFR, CIF, DDU.

Q3. How about your delivery time?
A: Generally, it will take 24-48 hours after receiving your advance payment. Some is one week. The specific delivery time depends on the items and the quantity of your order.

Q4. How to produce customized products?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q5. How to get a sample?
A: We can supply the sample if we have ready parts in stock.

Q6. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery.

Q7: How do you make our business long-term and good relationship?
A: 1. We keep good quality and competitive price to ensure our customers benefit ;
     2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter                 where they come from.