Share on:
A mobile phone signal repeater provides the ultimate solution in any area where cellular communications can not work well due to leak of signals. The repeater device features easy installation & operation, build-in indoor antenna and no interference. It could also improve indoor electromagnetism environments, protract cellular battery life and reduce radiation of cellphones. A mobile phone repeater is ideal for house, home, office use.
Repeaters are designed to fulfill the idea of one and main principle: to fill the areas with the weak or bad signal and to amplify these low signals in order to provide you with the communication suitable for you.
Item | Quantity |
Signal booster | 1pc |
Power adaptor | 1pc |
Outdoor log periodic antenna | 1pc |
Indoor ceiling antenna | 2pcs |
2way splitter | 1pc |
15m LMR 300 coaxial cable for connecting outdoor antenna and signal booster | 1pc |
5m LMR 300 coaxial cable for connecting signal booster and 2way splitter | 1pc |
10m LMR 300 coaxial cable for connecting 2way splitter and indoor antenna | 2pcs |
Reasons to Purchase Cell Phone Repeater with 2pcs indoor antennas.
Mobile Phone Signal Repeater |
1. Enhance Mobile Phone Signal Strength |
2. Improve Communication Quality |
3. Reduce Cellphone Radiation |
4. Protract Cellular Battery Life |
5. Cover 300-500 square meters |
6. Easy Operation |
7. Easy Installation |
8. Build-in Power Supply |
The repeater makes the signal stronger in places with poor signal coverage such as:
1) Underground areas: basements, parking lots, tunnels;
2) Other places where cellular signal is shielded by metal or concrete walls: offices, supermarkets, cinemas, hotels;
3) Places distant from the BTS like private houses.
Steps that describe the work of Repeater.
1) The outside antenna receives the signal from the nearest mobile base station.
2) The outside antenna sends the received signal through the coax cable to the installed Repeater.
3) The repeater accepts the low signal and improves it.
4) The improved signal goes to the inside antenna through the connection coax cable.
5) The inside antenna send the improved good signal to your mobile phone.
Features |
High gain, easy installation and operation. |
Full-duplex, single-port design, build-in power supply. |
Use ALC technology, adjust extent automatically |
LED Light Working & Signal Condition Indicators |
Big linear power, control intermodulation & scatteration stably |
Dependability stand by GB6993-86 standard |
Compatibility of electromagnetism according with ETS300 609-4 |
CE and RoHs Approved |
Technique Parameter
Frequency | 900/1800/2100MHz |
Gain ( dB) | Uplink Gp≥65 Downlink Gp≥70 |
Export power (Po) | ≥23dBm |
Pass band ripple | ≤3dB |
I/O impedance | 50Ω/N connector |
Noise figure | ≤4dB |
Transmission Delay | ≤0.5μs |
Ambient temperature | -10°C~60°C |
Power supply | AC110~240V 45~55Hz |
Size | 240 x182 x 22 mm |
Reliability | To the GB6993-86 standard |
Electromagnetic compatibility | To the ETS300 694-4 standard |
Function | a) Power supply LED denote b) Export power LED denote |
coverage area | 1000 square meters |
Installation Approaches
Technique Supporting
Note:
To use this product to enlarge your signal, the outdoor signal shall be as good as possible.
In case the indoor signal is always very low while outdoor signal is very good, the repeater can work well.