Insulation downlight mitt cover for plasterboard and concrete ceilings
- Category: Other Fireproofing Materials >>>
- Supplier: Chengdu Shuowu Technology Co. Ltd.
Share on (62380855470):
Product Overview
Description
Product Description
Product Description
Youngen fire hood has been assessed for the suspended ceiling and timber, steel or concrete Beam/Joist protected by plasterboard. Youngen fire hood have fully tested in accordance with AS 1530. Part 4-2005 <Methods for fire tests on building materials, components andstructures> and gotten three CSIRO Certificates as 2060/2061/2062.
| Features and benefits | 1. Preventing or delaying the spread of fire through the ceiling. 2.Hood is ventilated to reduce the heat build-up and provides acoustic insulation. 3.Hood can be fitted from above or below the ceiling. 4.Prevents flammable materials from direct with hot downlight thus, minimizing fire risk. 5.Easy to fix, no screws, drilling or support required. 6.Can fit wide range of high and low voltage downlights. 7.Suitable for plasterboard and concrete ceilings. 8.Fire rate is up to 120 minutes. 9.Reasonable cost and save money. |
| Installing steps | 1.Put the leg on the hood. 2.Roll up the hood and plug it into the upper side of the ceiling through the hole made for downlight. 3.The hood automatically opens, and pull down the leg so that the hood is firmly fixed on the ceiling. 4.Insert the leg into the plaster board or stuck on the lower edge of the concrete slab. |
| Application field | The requirement on decoration leads the downlights to have increasing popularities, in the commercial and residential buildings. Youngen fire hoods has been developed to provide maximum protection for the holes created by all sizes of downlights. In a fire situation, the Youngen fire hood expands internally to fill all the available space, with a highly fire-resistant insulating char. It stops fire to penetrate the hole and brings additional insulation protection to the ceiling void by reducing the chance of heat build-up and the ignition of flammables, such as accumulated dust and insulation. This fire hood is low density, high flexibility and good intensity, and can be used on different of ceilings, such as suspended plasterboard or concrete ceilings with wide range of voltage downlights. The fire hood is easy to squeeze into the ceiling from the hole made by downlights and can be installed low or above the ceilings. |
Company Information
Our Services
Packaging & Shipping
FAQ
We Recommend
vermiculite plates for stove
US $35.00-$50.00
fire door Rubber Intumescent Strip
US $0.10-$0.80
cellular glass foam glass gravel
US $50.00-$170.00
Intumescent Fire Collar for PVC Pipe
US $3.00
New Arrivals
New products from manufacturers at wholesale prices
