5 inch amazon HD 720P hot item pan/tilt newest wireless digital baby camera monitor

Product Overview

Description

5 inch amazon hot item pan/tilt newest baby monitor. the newest baby monitor factory

 1. Audio and video wireless transmission.
2. Half-duplex two-way voice intercom.
3. The transmission video resolution is 1280*720.
4. With pan/tilt rotation function.
5. 5-inch high-definition display with a resolution of 720*1280.
6. The camera has a built-in lullaby.
7. The camera is powered off, the indicator light flashes and a beep sounds.
8. The camera has a sound detection function that can illuminate the sleeping receiver while the indicator light flashes and emits a beep sound.
9. Support IR CUT, support night vision, night vision distance of 5 meters.
10. The lens angle of view is greater than 60 degrees (horizontal test)
11. Infrared switching requirements: IRCUT/IE LED start/stop threshold
5 lux, IR LED ON
15 lux, IR LED OFF
12. Camera: SONIX SN93700+ H62 Sensor
13. Receiver:  SONIX SN93701
14. The receiver supports power saving mode with automatic sleep function, sleep time four gear: 5 minutes, 30 minutes, 60 minutes, off.
15. The receiver has a lullaby playback function that can play 5 lullaby.
16. Receiver with ZOOM function, can double the video image
17. The receiver has a temperature display function that displays the temperature data transmitted by the camera wirelessly. You can switch between Celsius and Fahrenheit.
18. The receiver has a low-power reminder function (specifically, the receiver's lithium battery is low), and the sixth indicator flashes.
19. When the receiver has no signal, it has a reminder function, the indicator light flashes and emits a beep sound.
20. The receiver has a lithium battery with a capacity of 2000mAh. It complies with the 62133 certificate.
21. The charging time is 3 hours and the working time is 3-5 hours.
22. The receiver adds a camera by way of code.
23. The wireless transmission and reception distance is more than 300 meters (visible range).
24. Alarm function; camera power failure alarm (indicator buzzer)
25. When the LCD is sleeping, if there is sound at the camera , it can detect and light up the LCD

A, Camera Function

1. Audio and video capture: The device collects audio and video.

2. Setup mode: The receiver adds a camera by way of code.

3. Working mode: When the camera enters the working mode, the receiver can wirelessly receive audio and video signals.

4. Status indicator (1 monochrome green light):

When turned on, the green light flashes once every second;

Enter the code mode, the green light flashes quickly, three times a second;

The code is successful and the green light is always on.

5. Self-test after power-on,

6. The infrared light is automatically turned on at night (using a 940 wavelength lamp)

7. The camera has built-in temperature and humidity sensor module. humidity sensor module.

4. Monitor function  (5 inch screen)

1. Audio and video playback: The receiver plays the captured audio and video.

2. Setup mode: The receiver adds a camera by way of code.

3. Working mode: When the receiver enters the working mode, it can accept the audio and video signals from the camera.

4. Status indicator (5 monochrome green lights and 1 monochrome red light (specifically the sixth light)):

The sixth light flashes red (once per second): indicating that the lithium battery is low;

The sixth light is steady red: the lithium battery is charging;

The sixth light is red: it indicates that the charge is full.

The first green light is always on: it indicates that the camera and receiver are connected successfully.

The first green light flashes slowly (once per second): it means booting, not connected to the camera;

The first green light flashes quickly (three times a second): it means that the code is being coded.

The second to fifth green flashes from low to high: indicating the volume of the received volume.

The second to fifth green lights flash simultaneously: indicating that an alarm signal is received (specifically, an audible alarm and a camera power failure alarm)

5. One button 4 screen, (4 screen and single screen switching)

Our company infomation: