No Need Coating Waterslide Decal Paper Transfer Paper Laser White Background Water Transfer Decal Paper

Instruction for laser water transfer paper 

1.  Gloss surface is the printing surface,  finished printing without drying.

2.  After printing, image surface should be sprayed the automatic transparent paint directly with 190 light oil which you can buy from the market.

Note:

Cross spray painting: from top to bottom, from left to right continuous spraying;

3.  After sprayed the light oil, used hair dryer or dry naturally, after the light oil dry enough, with scissors or a cutting machine or cutting plotter to cut the shape with specifications required.

4. Put the transfer paper into the water for about 30-60 seconds and after other part of pattern of film and the bottom paper automatic detachment, sliding pattern film with the hand gently, it exposed around 0.5cm, the water temperature is best controlled at 25 degrees, be sure to keep the water container cleaning.

5. To wipe the transfer object surface cleanly, pay attention to: no oil pollution, dirt, debris, alcohol cleaning can be used when necessary, if pre spray a layer of 190 light oil or 40 white colors can effectively improve the adhesion.

6. The above expose about 0.5cm pattern film stick up directly, hold it, with the other hand to open the bottom paper gently. Pay attention when pulling strength; prevent wrinkle or rupture of membranes.