Plastic electric water heater portable for shower

Share on (62388991248):


Price:$3.78 - $3.88

Quantity:


Product Overview

Description



Products Description


ELECTRIC WARTER HEATER
Electric leakage protection                Over pressure protection                                      Lively style


Product Name
HYD-A01-1
Material
Plastic
Rated water flow
5L/min
Package
color card




  • Product performance description

The product has three positions to control the temperature, need not preheat in advance,
so there is no preheat when the heat energy dissipates, when use time opens does not need to close.You can put as much water as
you use, and there is no energy consumption of unused hot water, which is really energy saving .






FEATURES:
Electric leakage protection                                                      Over pressure protection

Most reasonable price                                                              Highly tested durability

Energy saving                                                                           Environment friendly


Product Paramenters


SPECIFICATIONS:
Circuit breaker
Cable size
Voltage
Power rating
50A
10mm²
110/127V
4000/5400W
40A
6mm²
110/127V
3300/4400W
30A
4mm²
220/230V
5400W
25A
4mm²
220/230V
4400W
35A
6mm²
127V
3840W


Frequency

50/60HZ
Out water
30-60℃
IP class
IP 24
Grounding wire
YES
Water flow
5L/min
Hose and hand
YES


Details Images




Product Usage



    • Product usage introduction



1. The hand shower is attached to the shower head.Place the selector key in the position desired.The water temperature can be controlled through the water value.




  • Product usage introduction

2. Depending on the cost of the shower head,you can get a variety of sprays to improve your shower experience.they supply water at a consistent temperature which can be varied depending on user preference.


Possible Problems And Solutions In Use


Problem
Problem reason
Solution
The water is cold
The selection temperature is in
Put the selection temperature key 
in the hot or warm position
No water is flowing through the shower head
The main register is closed or 
there is air inside the pipes
Open the main register and/or the taps and let the water flow to 
remove the air. The shower head 
must be disconnected of the electrical system .
The shower head is not heating 
properly even with select key in 
the not position
The wires do not have the 
properly size as specified in the
Contact a qualified technician. To 
check your electrical installation.

Low voltage: The voltage of your 
system may be not constant or 
under the values specified.
Contact a qualified technician. To verify your electrical system. If the nominal voltage of your system are under the values
specified by your electric supplier (110~/127~or220V~), contact the utility responsible for your electrical supply.
Burn of the element
Wear due to the normal use
Inadequate electric installation

Inadequate electric installation
Check the voltage and 
characteristics from the electric 
installation, correct them and 
change the element according.


Our Advantages


1.We have a professional foreign trade team.

2.In order to reach a good cooperative relationship with customers, we have strict requirements on product quality of cooperative
factories.

3.We have rich experience in foreign trade.


FAQ


1. Q:What certification do you have? 
     A:We have CE certificate. 

2. Q: Do you provide samples ? Is it free or extra ? 
     A: Yes, we could offer the sample but do not free. 

3. Q: Do you acceptance LOGO printing on products or package? 
     A: Yes,for mass order, we accept your LOGO on products and package,but for sample will be confirmed with each other.

4. Q: What about the price? 
     A: We promise we will offer you our best price. 

5. Q: What is your terms of payment?
     A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance. 

6. Q: What is your terms of delivery?      
     A: FOB NINGBO. 

7. Q: How long is your delivery time? 
     A: It is according to quantity. 

8. Q: How to solve the quality problems after sales?
     A:Take photos of the problems and send to us.After we confirm the problems,within four days,we will make a satisfied solution for you.


Company Introduction




The Customer Evaluation




0.1864 s.