1.simple structure low operation cost. Using the principle of stone strike stone , smaller wear.
2.broken rate is high, energy conservation
3.with fine, coarse grinding function
4.little affected by material moisture content, humidity can reach 8%.
5.working noise is less than 75 db, less dust pollution.
6.suitable for breaking medium hard, especially hard materials.
7.products are cubic, packing density is big, a very small iron pollution
8.little wearing of the impeller , easy maintenance.
Working Principles of composite crusher
The motor drives the rotor that fixed on the main bearing to run quickly toward certain direction when the machine works. The materials are fallen into the throw-up disc and impacted by the high speed strips of the throw-up disc, and then strikes with the impact board under the effect of Centrifugal Force.
Because the impact board is bevel and the gravitation, the materials are threw to the taper crushing room and impacted by the high-rotating up hammerhead. After gaining sufficient energy, the materials are thrown to the impact board again and action repeats. The materials strike with each other in the crushing room and then are down to the column-shape rotor room. Then crushed, pressed, and ground and action repeats. In this way, the materials go through up, middle, and down rotor crushing rooms and crushed, pressed, and ground by the hammers and the impact boards, and finally the materials are gradually crushed into needed sizes and come out.
Introduction of Composite crusher
Composite crusher is one type of fine-crushing equipment that has strong crushing power for mid-hardness materials, such as limestone, shale, glass, ceramics, dolomite, cement clinker, iron ore, molybdenum ore, aluminum, cobble, rock phosphorite, copper ore, magnesite, serpentine, calces, gypsum, lump coal, zeolite and sandstone, etc.
