Share on (62413790722):
Setting Information | ||
Model | AE02 | |
Rated voltage | 100-240V | |
Power | 3-50W | |
Battery | 2600 mAh 11.1V | |
Emergency Time | 120mins | |
Raw Materials | Aluminum | |
Battery Type | Li-ion | |
Size | 130*58*22mm |
Material | Aluminium |
Input Voltage | AC 85-AC277V,50HZ/60HZ |
Emergency time | 1-3hours |
Emergency conversion time | Less than 0.1Sec |
Charging time | 24h |
Emergency output Voltage | DC 20- 74V |
Battery model | Li-ion |
LED charging indicator | Green |
Test switch | Yes |
Protection | Over-charge/Over-discharge/Shirt circult |
Emergency Mode | Constant Power |
Output power | 3-5W |
Inverter dimensions | 155×40×30mm |
1. It should be connected according to the wiring diagram on the emergency kit’s surface strictly
2. When connecting to AC power, see if it works normally, at this time, green indicating light is on. At the same time, red indicating light would be on too, but it will be off after full charged. Two status of LED lamp:
• The LED lamp is off when its own driver is not connected 220V AC power;
• The LED lamp if on when its own driver is connected 220V AC power
3. Press the test button, the emergency kit enters the status of simulation of power failure. At this time, the indicating light of main power (green) and charging (red) is off, while the emergency indicating light (blue) is on, it is in emergency status, and the LED lamp is working, but the brightness is not so high. After loosing the button, it will return to main power status again.
4. Cut off the emergency kit input switch, the LED lamp will be in emergency status.
5. Cutting off the LED lamp’s connection to the emergency kit in emergency status, the emergency kit will stop supplying power to the LED lamp, the emergency indicating light would be off.
* Finishing installation after ensuring all are normal after testing.
* After testing the above steps, if OK, installation is finished.
6. Keeping a record of maintenance and maintaining the emergency kit and LED lamp regularly
7. Checking regularly to ensure its lifespan and usage.
led Emergency Kit For LED panel Downlight led emergency driver | ||||||
Contact us | ||||||
Hedy Business Development | ||||||
ZHEJIANG ALITE LIGHTING CO., LTD. | ||||||
Add: 2nd Floor, 8th Building, No. 188 East Development Avenue, Taizhou City, Zhejiang, China T:0086-576-8886-1388 Mob / Wechat /Whatsapp:0086-13738589316 |
New products from manufacturers at wholesale prices