Heat insulation material/reflective aluminium bubble foil insulation
1) Al / bubble / Al (bubble: ¢ : 10mm, H: 4mm or H: 2.5mm)
2) Al / bubble + bubble / Al (bubble: ¢ : 10mm, H: 4mm or H: 2.5mm)
3) Al / bubble / white PE anti-flaming sheet (bubble: ¢ : 10mm, H: 4mm or H: 2.5mm)
4) Al / white anti-flaming bubble / Aluminum with blue color (bubble: ¢ : 20mm, H: 7mm)
5) AL / white anti flaming bubble / woven cloth /AL ( bubble: ¢ : 20mm, H: 7mm ).
Normal roll size: 1.2m x 40m / roll, various lengths available upon requests
4mm or customzied
1.2*40m per roll
Roof,Ceiling,Wall,Floor,Attic,Livestock Shelters,Basement,Factory buildings,Duct wrappings,Container liner,Sun-stop cover and vehicles.
1.Purchase approximately 10% more for overlapping and to provide the proper air gap between the purlins
2.Cover the metal roof purlins with double-sided adhesive tape. Unroll the foil wrap insulation and attach it to the first purlin.
3.Secure the bubble foil to the framing members with furring strips. Use a drill equipped with a screwdriver bit to drive the screws into the framing members.
4.Cover the seams of the bubble insulation with foil tape.
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
A:Normally 7-12 days after we get the deposit
A: Have no MOQ limited,if the material is Stock
A: Small amount accept Paypal, Mass Amount 30% T/T, Remit the rest balance after shipment before surrendering the BL( Against the BL copy)
A: U can directly sent me a mail to xcbwk(at)xcgs.com for your required details .