Share on (62425368327):
[IPL series]
Low foaming
Stable emulsion
Strong wetting
[Technical parameter]
IPL Series | 1004 | |
Cloud point(℃) | 52.0/B | Test methods A:1g surfactant + 99g water B:5g surfactant + 45g 25% soln. of butyldiglycol C:1g surfactant + 100g 5% soln. of NaCl D:5g surfactant + 25g 25% soln. of butyldiglycol |
PH | 5.0-7.0 | |
| Pour Point(℃) | -9 | |
| HLB | 10.5 | |
Surface Tension(mN/m) | 27.4 | |
| CMC(ppm) | - | |
| Wetting(s) | 75 | |
| Foaming(mm) | 82 | |
| Emulsifing(s) | 660 |
[Silicone Oil Emulsifying Performance]
| IT series | IPL series | IP series | AEO series | ||
| Polydimethyl silicone oil | Silicone oil emulsifying | ++ | + | - | ++ |
| HLB Interval | ++ | +++ | + | + | |
| High temperature resistance | ++ | + | + | ++ | |
| Gel property | ++ | ++ | ++ | - | |
| Remark:"+"means performing well The more"+", the better performance | |||||
| IT series | IPL series | IP series | AEO series | ||
Amino silicon oil | Silicone oil emulsifying power | ++ | ++ | + | + |
| Penetration effect on fabric | + | ++ | ++ | - | |
| Bubble content | + | ++ | +++ | - | |
| Heating-resisting | ++ | + | ++ | ++ | |
| Salt-resisting | ++ | + | - | ++ | |
| Alkali-resisting | ++ | + | - | ++ | |
| HLB Interval | + | ++ | + | + | |
| High oil content | + | ++ | +++ | - | |
| Remark:"+"means performing well The more"+", the better performance | |||||
![]() | |
![]() | ![]() |
The IPL series of silicone oil systems are easier to spread on fabrics | |
| ![]() |
| Emulsion appearance after 30 days of placement | Emulsion appearance after adding salt |
| The foam obtained from emulsifying process which is using IPL series is lower and the defoaming rate is faster than that of IT series. | |










New products from manufacturers at wholesale prices