Высококачественный модифицированный эпоксидный балласт, антикоррозийное покрытие серого цвета

Good resistance to water and oil as well as favorable water and oil alternating corrosion resistance

Excellent adhesion

Low odor and toxicity

Tough film

As anticorrosive coatings for ballast tanks, waste water tanks and sewage pipes, etc.

Technical Parameter

Drying Time & Coating Intervals

Mixing ratio:main agent/firming agent=8:1 by weight

Standard film thickness: Dry:100μm    Wet:185μm

Academic spreading rate:0.21kg/m2/100μm         0.142L/m2/100μm

Solid contents: 75%

Humidity requirement: below 85%

Specific gravity:1.5

Temperature℃               10     20      30

Dry to touch hrs              2      1.5      1

Dry semihard hrs            14     10       8

Min interval hrs               14     10       8

Max interva       

Remove salts and other water soluble contaminants with fresh water.

Remove oil in accordance with the solvent cleaning standard SSPC-SP1.

Remove rust and scale by sand blasting to ISO Sa 2.5 (SSPC-SP10).

Remove the contaminants like dust with high pressure blower.

Confirm the surface clean and dry before working 

Substrate: bare steel

Top coat: refer to our coating system