Factory Direct Dental custom mixing time silicone putty impression material
- Category: >>>
- Supplier: Henan Yueyan Industry Co. Ltd.
Share on (62432167390):
Product Overview
Description
Product Description
Factory Direct Dental custom mixing time silicone putty impression material
A dental impression is a negative imprint of hard (teeth) and soft tissues in the mouth from which a positive reproduction (cast or model) can be formed. It is made by placing an appropriate material in a stock or custom dental impression tray which is designed to roughly fit over the dental arches.
Chemical nature | Vinyl Polysiloxane |
Color | Base- colorful, catalyst-white |
Recommended hand-mixing time: (23 C) | 30-40s |
Total working time: (23 C including hand-mixing time) | 90s |
Mouth removel time | Mouth removel time |
Max. compression set | < 1.0% |
Recovery from deformation | > 99.0% |
Max. dimensional change | 24hrs<0.3%, 336hrs (2weeks)<0.3% |
Recommended gypsum pour time | 2hrs-2weeks |
Regular packaging: 25g putty+25g base, 20g putty+20g base, 350g putty+350g base, Or other volume could be customized. |
Detailed Images
Features Of our Dental Silicone Impression Material Putty Kit
1. Putty Impression Material provides all the benefits of a true putty, including higher consistency and insertion force thanheavy body materials.Plus, it is designed exclusively for use with Mixing Unit – enabling reliable and reproducible dosage.
2. All impression materials get warmer – and therefore set faster –when placed in the mouth.
3. Putty material exits the 2 unit at approximately 97ºF. Because Putty is already warm when it is seated in the mouth,it helps
warm up the wash material, actually accelerating setting time without reducing the intraoral working time.
4. Putty offers high detail reproduction and the same consistency and insertion force as conventional hand-mix putties.
5. Without the potential for negative interaction between putty and glove.
Different packaging could be provided, and your privte logo could be printed on the packaging.
The color of could be customized too according to your needs.
Technical data:
Working time:Putty-1 min. and 30sec.Wash-1 min.
Consolidation time: Putty-<4 min. Wash-5 min.
Mixing time:45sec.
Max. compressive deformation: <1.0%
recovery of elasticity:>99.0%
Max. dimensional change:after 24h within 0.3% and after 336h within 0.3%.
Upper Tray + Lower Tray, different size could be choosen: Small, middle & big size
How to use
Step 1: Get the impression trays and stand in front of a mirror.
Step 2: Open the set of putty, both white and color . Ensure that your hands are clean to prevent dust or dirt from contacting with the putty.
Step 3: Use fingers to knead the impression material till to an uniform color within 45s or less.
Step 4: Roll into the shape of log. Load and spread evenly into the upper tray.
Make sure it is filled from edge to edge using fingers. It's better to done this process in 90s .
Step 5: Place the tray over the center of teeth and press gently to the end using fingers. Let it rest for approximately 3 minutes.
Step 6: Open the mouth and pull down straight.
Step 7 : Repeat the procedure for lower upper tray . You will get the perfect of teeth impression.
Attention:
1. Suggest use disposable polyethylene plastic gloves, rather than natural rubber gloves.
2. This product contains platinum metal catalyst, it will show down or even stop the curing reaction once touch sulfur,
phosphorus, amine.During use, sulfur, phosphorus,amines, acrylic acud and methyl acrylate and other chemicals must be avoided.
3. Placed in a cool place, summer must be refrigerated.
4. Temperature have a a significant impact on the curing time, low temperature curing slow down, hign temperature curing speed,
adjust the rhythm according to the environment and the temperature of the finger
5. Strictly recommended amount of base and catalyst.Unequal amounts will be delayed or accelerated curing.
1. Suggest use disposable polyethylene plastic gloves, rather than natural rubber gloves.
2. This product contains platinum metal catalyst, it will show down or even stop the curing reaction once touch sulfur,
phosphorus, amine.During use, sulfur, phosphorus,amines, acrylic acud and methyl acrylate and other chemicals must be avoided.
3. Placed in a cool place, summer must be refrigerated.
4. Temperature have a a significant impact on the curing time, low temperature curing slow down, hign temperature curing speed,
adjust the rhythm according to the environment and the temperature of the finger
5. Strictly recommended amount of base and catalyst.Unequal amounts will be delayed or accelerated curing.
Packing & Delivery
Company Profile
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
