Downlight covers has been assessed for the suspended ceiling and timber, steel or concrete Beam/Joist protected by plasterboard. Youngen fire hood have fully tested in accordance with AS 1530. Part 4-2005 <Methods for fire tests on building materials, components andstructures> and gotten three CSIRO Certificates as 2060/2061/2062.
Features and benefits
1. Preventing or delaying the spread of fire through the ceiling. 2.Hood is ventilated to reduce the heat build-up and provides acoustic insulation. 3.Hood can be fitted from above or below the ceiling. 4.Prevents flammable materials from direct with hot downlight thus, minimizing fire risk. 5.Easy to fix, no screws, drilling or support required. 6.Can fit wide range of high and low voltage downlights. 7.Suitable for plasterboard and concrete ceilings. 8.Fire rate is up to 120 minutes. 9.Reasonable cost and save money.
Installing steps
1.Put the leg on the hood. 2.Roll up the hood and plug it into the upper side of the ceiling through the hole made for downlight. 3.The hood automatically opens, and pull down the leg so that the hood is firmly fixed on the ceiling. 4.Insert the leg into the plaster board or stuck on the lower edge of the concrete slab.
Application field
The requirement on decoration leads the downlights to have increasing popularities, in the commercial and residential buildings. Youngen fire hoods has been developed to provide maximum protection for the holes created by all sizes of downlights. In a fire situation, the Youngen fire hood expands internally to fill all the available space, with a highly fire-resistant insulating char. It stops fire to penetrate the hole and brings additional insulation protection to the ceiling void by reducing the chance of heat build-up and the ignition of flammables, such as accumulated dust and insulation. This fire hood is low density, high flexibility and good intensity, and can be used on different of ceilings, such as suspended plasterboard or concrete ceilings with wide range of voltage downlights. The fire hood is easy to squeeze into the ceiling from the hole made by downlights and can be installed low or above the ceilings.
Company Information
Our Services
Why choose us?
1.Professional manufacturers: We devoted ourselves to thermal insulation materials many years, covering most of Australia and the Americas downlight mitt covers market. We are expecting become your long team partner in China. Both OEM and ODM are available.
2.High quality: Using high quality material and establishing a strict quality control system, assigning specific persons in charge of each part of production, from raw material purchase to assembly.
3. Fast dispatch: We have two production lines and efficient productivity. Under normal circumstances, delivery can be made within 20 days.
4.Small order accepted: Low MOQ accepted & 1 m2 are available
Packaging & Shipping
FAQ
Q:Can you use our logo on the product?
A:Yes, we can do Q it according to your requirements.
Q:Can you customize the products?
A:Yes, we have a professional R&D team to customize the products according to your requirements.
Q:Can you send us the samples for free?
A:You need to pay the samples and freight, we will return them if we received your big order later.
Q:Can I pay the money after you deliver the goods?
A:Sorry , we only accept payment before shipment.
Q:How long is your delivery time?
A:We will deliver the goods in 15-35 days after the payment.
