Share on (62477750657):
FB40-D Explosion Proof Obstruction Double Light
Descriptions:
The explosion-proof aviation Obstruction double Light adopts aluminum alloy die-casting shell with high-voltage electrostatic spray on the surface.
Features:
• Steel glass transparent cover, can work normally in various harsh environments such as exposure, rain, snow and hail;
• Explosion-proof aviation flashing Obstruction Light has three kinds of low light intensity, medium intensity light and high intensity light;
• Equipped with long-life and high-brightness LED light source, low power consumption, high brightness, long life of 100,000 hours, and meet the requirements of energy saving and environmental protection;
• With integrated chip, it has multiple protection circuits, which can realize synchronous flashing of multiple lights through synchronous signal line connection or adding GPS wireless synchronization module.
• It can be made into wireless synchronization mode according to requirements, which is convenient to use and install. Please specify when ordering;
• Highly protective structural design, equipped with anti-aging silicone rubber gasket, to achieve IP66 protection level requirements;
• It can be equipped with solar panels and is powered by solar energy. It can be used for more than 15 hours on a single charge. Please indicate when ordering if necessary.
• Steel pipe or cable wiring can be used.
• With built in Photocell(optional)
• with service+standby mode ,Normally one light works, it will auto transfer to the standby light in case of failure of the service light.(optional)
Explosion Protection to EN, IEC
• Can be used in Zone 1,2,21,22,Class I, Zone 1,2,Division 2, Groups A, B, C, D.
• Ultra bright LED lamp, low consumption and long service life up to 50,000 hours,integrated
chip control with various circuit protection.
• Synchronous flashing of light fittings through signal lines.
Specification:
|
Mode |
FB40-D |
Dimensions |
170x170x230 |
|
Rated power |
AC220V, DC24V |
Packing size |
360mm×250mm×200mm |
|
Power frequency |
50HZ~60HZ |
Production level |
IP66 |
|
Power consumption |
40W |
|
-20~+40℃ |
|
Light source |
LED |
Explosion-proof mark |
ExdeIICT6Gb/DIP A20 TA,T6 |
|
Led color |
red |
Peak light intensity |
≥32.5cd- ≥20000cd |
|
Flashing frequency |
20-60 times/min |
Anti-corrosion level |
WF1 *WF2 |
|
Introduction device |
G3/4" inlet specification, suitable for ∅8mm-∅14mm cable. |
|
≤2.5mm 2 wire reliable connection |
New products from manufacturers at wholesale prices