TC 1089 110PC Hydraulic Grease Fitting Nipple Assortment Kit

Grease fittings are permanently installed by either a (taper) thread or straight push-fit ('hammer in') arrangement, leaving a nipple connection that a grease gun attaches to. The pressure supplied by the grease gun forces a small captive bearing ball in the fitting to move back against the force of its retaining spring. The arrangement is thus essentially a valve that opens under pressure to allow lubricant to pass through a channel and be forced into the voids of the bearing. When the pressure ceases, the ball returns to its closed position. The ball excludes dirt and functions as a check valve to prevent grease escaping back out of the fitting. The ball is almost flush with the surface of the fitting so that it can be wiped clean to reduce the amount of debris carried with the grease into the bearing.

Details Images

Product name	110PC METRIC GREASE FITTING ASSORTMENT
Product number	TC-1089
Material	Galvanized iron
Specification	M6*1 180° 60PCS  M6*1 90° 5PCS  M6*1 45° 5PCS  M8*1.25 45° 5PCS  M8*1.25 180° 10PCS  M8*1.25 90° 5PCS  M10*1.5 45° 5PCS  M10*1.5 90° 5PCS M10*1.5 180° 10PCS

Similar products

TC-1079 55PC INCH GREASE FITTING

TC-1078 110PC METRIC GREASE FITTING

TC-1088 100PC INCH GREASE FITTING

TC-M2006 552PC TERMINAL SET

TC-3123 520PC TERMINAL SET

TC-3136 180PC TERMINAL SET