Advantages of environment friendly energy saving polyurethane sandwich panel production line
1.The weight is more lighter
2.The thickness of wall more thinner
3.More easy to install, take a modular assembly, saving installation time
4. Higher strength, more anti-aging
5. Higher energy efficiency
6.More waterproof
7.The fireproof performance meets the national A standard and it is non-combustible;
8.Non-toxic, harmless, non-polluting, non-radioactive, it is a green building material
Widly usage
EPS wall panels can be used at Industrial and civil non-load-bearing internal external wall, kitchen and bathroom partition, integrated housing, high-end villa, assembly building supporting wall board
Machinery system
Whole line of eps wall panel making machine
Raw material Automatic feeding and metering system
Machine part: Automatic Material feeding and metering system
Introduce :1.Cement ,flyash,EPS particels will be metering and feeding into the mixer automatically to save the labors and improve working efficiency also it is more environmentally .
2.Sand (or ceramsite /slag /pumice stone other agregate) and additives will be feeding into the mixer by lifting hopper
Machine parts :Platform
Platform type : 1.Metering platform,
2.Mixing platform (necessary),
3.Casting platform (necessary),
4.Electric control cabinet platform ,
5.Auxiliary Platform /Calcium Silicate Board installation platform
Besides necessary platform , other platform we can equip as client requirement .
Raw material automatic mixing system
Machine part: Double-shaft mixer
Capacity available :1.2/1.5/2.0/2.5/3.0/3.5 sqm
Introduce:the mixer capacity is related to the mould car quantity , so we will equip the mixer after confirm the capacity with client . so that can makre sure our proposal is suit to you .
Features: the double shaft is to blend the raw material more even ,also save time . different capacity to satisfy different client's requirement .
Machine part:Second mixing mixer
Unique feature :If the mould car quantity is more than 10 units ,then we will equip the second mixing mixer, so as to save the mixing time of the first mixer and improve working efficiency ,increase productivity .
Note: normally use one-shaft mixer ,only large capacity will equip second mixing if small capacity ,second storage hopper is enough .
Automatic forming system
Machine part:Pump+pipe
Introduce : After the mixer mix the raw material well then the workers use the pump and pipe to cast the slurry into the mould car
Features:The pump is to make the pouring more even, no need to vibrate, and the working platform will be clean and the material will not be wasted.
EPS forming system
Machine part:The Boiler system
Introduce:The boiler will supply heat for EPS foam
Feul:coal (need burner),gas ,oil
Machine part: EPS foaming machine
Introduce:It will foam the eps by boiler supply heat and foam the EPS into the requested size .
Note: If you can buy foamed EPS particles locally ,then this parts no need .
| |
| Capacity | 20,000sqm~600,000sqm per year |
| Thickness | 50-250mm thickness. special sizes need to be customized |
| Length | 2440~3600mm, special sizes need to be customized |
| Width | 610mm , special sizes need to be customized |
| Raw materia | There are mainly two different types
1. Cement+fly ash/eps/ceramsite/sand, etc (optional, can choose to add or not add)
2. Fomed cement+additives |
| Finished board type | 1. Composite board/sandwich board, with surface board
2. Lightweight solid panel, without furface board |
| Surface board types | 1. Calcium silicate board
2. Fiber cement board
3. Mgo board |
| Electrical | There are mainly two different types |
FAQ
Video of installation https://youtu.be/cd4s_dAgpHM
Introduction of facotry https://youtu.be/B1bTCtDgBAI
Ecuador project introduction https://youtu.be/llNYKA3IObo
Horizontal mold car https://youtu.be/8TRlyrUtbHM
Sample project
Packing and delivery
Certifications
Our Company
OYD group was establised in 2008. we have 5 subsidiaries for producing different kinds of products, eps concrete wall panel machine; mgo board production line; hollow glass aluminum spacer; Laser cutting, etc. We moved to a new area, which has 66000 sqm. Plant area occupy 60000sqm and the office building occupy 6000sqm.
