HC K037 For Sale IV cannula with Drug feeding mouth&Indwelling needle/Vein indwelling needle

Product performance: The puncture pain is small, safe and reliable, effectively reducing repeated puncture of multiple infusions, and reducing the pain of patients.

Main structure: It is mainly composed of heparin cap, tee, connecting tube, hemostatic device, cannula seat, cannula, and needle tube.

Fourth, the scope of application: for intravenous infusion of indwelling patients.

 V. Instructions for use: Clinicians and nurses must be trained in venipuncture techniques and understand

 Potential hazards; aseptic techniques must be used to properly disinfect the skin and keep the puncture site sterile; all patients must comply with the provisions of comprehensive protective measures.

1. Remove the product from the single package.

 2. Connect the infusion set through the heparin cap to drain the gas, or remove the protective cap and connect the infusion set to the infusion set screw connector to drain the gas.

3. Grasp the cannula holder of the indwelling needle with your thumb and index finger and remove the sheath. Note: When removing the sheath, avoid holding the needle handle only, and do not bend or damage the needle tip.

4. Hold the cannula holder with your left hand, slightly rotate the needle handle from left to right, and then reset to prevent the cannula from sticking to the needle tube. Hold the needle handle (the needle handle and the cannula holder should be tight) to puncture the vein at a lower angle.

5. Observe blood returning to the cannula.

6. Feed the cannula into the vein, and then withdraw the steel needle. Do not insert the steel needle into the cannula again to prevent damage to the cannula.

7. Put the steel needle into the special collection device.

8. Fix the indwelling needle with adhesive tape and sterile stickers according to the operating procedures, and then perform the routine infusion.