1,First check whether the belt has worn.Method with two fingers,if both sides of the belt can touch, indicating that the belt has been worn, at this time adjust the position of the motor and tight the belt, but if the belt is too worn or adjust the position of the motor ,then unable to solve the problem should replace the belt.
2,If the belt is normal, the capacitor should be replaced.
3,If not resolved, the problem may appear on the computer board, the thyristor of controlling the motor is damaged, measure whether the voltage is normal when the motor is running.Replace the computer board if it is abnormal.
4,If the motor is damaged, replace it.
5,The wear diameter of the clutch spring becomes larger and rusts, which makes the spring unable to be hold the dehydration shaft tightly to drive the stripping bucket to operate normally. Replace the torsion spring or clutch.
Packaging details
Fit to exported standard, safe and strong, in cartons.
