HHD Poultry Hatchery Machine 56 Egg Incubator Automatic Egg Turning 12 Months Setter and Hatch CE
- Category: >>>
- Supplier: Nanchang Edward Technology Co. Ltd.Nanchang Ltd.
Share on (62520686745):
Product Overview
Description
Related Products
Products Description
HHD Online Hot Seller EW-56 Digital Egg Tray for Full Automatic Incubator.
Brand | HHD |
Gross weight | 4.3KG |
Voltage | 12V/110V/220V/12+220V |
Power | 80W |
Working life | 8-12 years |
Place of origin | China |
Full Automatic | Yes |
Warranty | 1 Year |
Model | EW-56 |
KEY:
1. Testing your unit for the first time.
2. Setting the temperature.
3. Temperature alarm parameter settings (AL
and AH)
4. Humidity alarm parameter settings (AS)
5. Calibrating temperature sensor reading (CA)
6. Temperature Upper and lower limit set (HS
and LS)
7. Heating Element (HU and HD)
8. Display Symbols
9. Using your incubato
2. Setting the temperature.
3. Temperature alarm parameter settings (AL
and AH)
4. Humidity alarm parameter settings (AS)
5. Calibrating temperature sensor reading (CA)
6. Temperature Upper and lower limit set (HS
and LS)
7. Heating Element (HU and HD)
8. Display Symbols
9. Using your incubato
Calibrating temperature sensor reading:
The thermometer correct reading is set at 0oC. The reading given by the thermometer can be adjusted if you find that the
temperature reading is incorrect using a calibrated thermometer.
5.1 Calibrating the temperature sensor measurement. (CA)
5.2 Press and hold “SETT” for 3 sec.
5.3 Push “+” or “-“ until code “CA” appears in the temperature screen.
5.4 Push “SET”
5.5 Push “+” or “-“ to adjust to the correct measurement.
- Note that the adjustment is the difference between the thermometer readings
and should be adjusted with “- “ if the temperature reading of the incubator is to
high and normal value (indicating + value) if the incubator reading is too low.
5.1 Calibrating the temperature sensor measurement. (CA)
5.2 Press and hold “SETT” for 3 sec.
5.3 Push “+” or “-“ until code “CA” appears in the temperature screen.
5.4 Push “SET”
5.5 Push “+” or “-“ to adjust to the correct measurement.
- Note that the adjustment is the difference between the thermometer readings
and should be adjusted with “- “ if the temperature reading of the incubator is to
high and normal value (indicating + value) if the incubator reading is too low.
Operation instruction
1. Test your incubator to see if it functions properly.
2.Connect the egg turner plug to the control plug inside the egg compartment.
3. Fill one or both water channels depending on local humidity levels.
4. Set the eggs with the pointy side down.
5. Close the lid and switch on the incubator.
6. Press the reset button (left green button) to reset and start the day counter from “0”.(this will also rest the egg turning countdown back to 1:59)
7. Keep an eye on the humidity reading and fill the water channels when needed. (normally every 4 days)
8. At day 18 you should remove the tray with the turning mechanism and place the eggs on top of he bottom grid.
9. At the same time it is important to fill both water channels to increase the humidity. (this is very important to ensure that the eggshells are soft enough for the chicks to break through.)
10.You should never open the lid when the chicks start to hatch. If you do, the loss of humidity will cause the eggshells of the unhatched eggs to dry out and they won’t able to break through the egg.
2.Connect the egg turner plug to the control plug inside the egg compartment.
3. Fill one or both water channels depending on local humidity levels.
4. Set the eggs with the pointy side down.
5. Close the lid and switch on the incubator.
6. Press the reset button (left green button) to reset and start the day counter from “0”.(this will also rest the egg turning countdown back to 1:59)
7. Keep an eye on the humidity reading and fill the water channels when needed. (normally every 4 days)
8. At day 18 you should remove the tray with the turning mechanism and place the eggs on top of he bottom grid.
9. At the same time it is important to fill both water channels to increase the humidity. (this is very important to ensure that the eggshells are soft enough for the chicks to break through.)
10.You should never open the lid when the chicks start to hatch. If you do, the loss of humidity will cause the eggshells of the unhatched eggs to dry out and they won’t able to break through the egg.
Company Information
Our company is located in Nanchang, Jiangxi Province, and has produced incubators for overseas sales more than 12 years. Our products are highly praised at home and abroad, with an incubation rate of 98%.
Our factory covers an area of 8,000 square meters and has independent production lines and packaging lines. The pre-packaging test is good, and we have perfect after-sales service. Enjoy aluminum products for 3 years.
Our factory covers an area of 8,000 square meters and has independent production lines and packaging lines. The pre-packaging test is good, and we have perfect after-sales service. Enjoy aluminum products for 3 years.
With more than 10 years of export experience, we provide high-quality products at reasonable prices and thoughtful services to ensure that we can become your best partner. Our motto is:Quality is survival, and credibility is development." I sincerely hope that we will have the opportunity to cooperate with you. We are with your support and our efforts.It will be based on mutual benefit.
Our company covers an area of more than 20,000 square meters, with a plastic product factory and a fine processing factory. The annual output is up to 4,00000 sets of hatching equipment. Besides, 2008 Full Function Computer System developed by us features characteristics of high reliability and easy operation. They are favored by domestic and foreign customers, and are exported to Southeast Asia, Africa, North Korea, Australia, and some other areas.
Certifications & Customer Feedback
Favourable Comments
Contact us
We Recommend
Dual Power Capacity 52 Egg Automatic Incubator Hatching Eggs Machine
US $13.00-$14.00
TONGDA Manufactured Egg Incubator Spare Parts
US $12.00-$20.00
New Arrivals
New products from manufacturers at wholesale prices
