2021 new type good price the most professional micro powder grinding mill (62523391232)

Share on (62523391232):

Price:$43,880.00 - $44,800.00


Product Overview



Product Description


the most professional micro powder grinding mill introduction


  • Grinder type: Ultrafine Mill

  • Application area: micron powder producing.

  • Grinding material:  middle and low hardness, moisture below 6%, and the material should be non-explosive and non-flammable, such as: calcite, chalk, limestone, dolomite, kaolin, bentonite, steatite, mica, magnetite, iolite, pyrophillite, vermiculite, meerschaum, attapulgite, diatomite, barite, gypsum, alunite, graphite, fluorite, phosphate ore, potassium ore pumice, etc.

  • Capacity:  0.5-25t/h (can be customized)

  • Max feeding size:  20mm (can be customized)

  • Final size (mesh): 325-2500(can be customized)

  • Get Quote and More info>>>> WhatsApp/WeChat: 86 15737192418





the most professional micro powder grinding mill features


  • High capacity and low consumption.

  • Advanced grinding cavity design.

  • High quality grinding media.

  • Advanced intelligent speed control device.

  • Large range of fineness adjusting.



we can supply the whole grinding production line

Get Quote and More info>>>> WhatsApp/WeChat: 86 15737192418





the most professional micro powder grinding mill working principle



  • When the ultrafine mill machines are at work, every part of the machines work synonymously. The motor drives the grinding disc to rotate by the reducer, etc. the air lock feeder from the feed inlet fall at the center of the grinding disk, and hot air into the air from entering the mill. As the disc rotates, the material in the role of centrifugal force, move to the edge of the grinding disc. The disc of the annular groove by roller is compacted and crushed. Crushed material is sent in the edge of the grinding disc with high-speed airflow by wind ring. Large particles are sent directly onto the disc for regrinding.

  • Material gas flow through the upper separator under the action of rotating rotor becomes coarse powder from cone to disc. Qualified fine powder along with air flow through the mill is sent into dust collection device, namely product. Moisture containing material is dried in the contact with hot air flow. By adjusting the temperature of hot air, it can satisfy the different humidity material requirements to achieve the required product moisture. By adjusting the separator, it can achieve the desired products with different thickness.






  the most professional micro powder grinding mill spare parts


Spare parts of xzm series ultrafine mill include:
lower body, turn table, ring, main unit base, lower distributor, rollers and so on.





the most professional micro powder grinding mill paramete


We can supply any model of the below machine, please contact us and get the price.

Get Quote and More info>>>> WhatsApp/WeChat: 86 15737192418








Our Machine Passed Patent and CE&ISO Certifications.




Packaging & Shipping


                 Packaging Detail:

  • Packing Requirement: Standar Containers                                                                       

  • Inner Packing: Product wrapped by PP-Bubble

  • Outer Packing: Load container, Spare Parts in wooden case

  • Storage Requirement: waterproof, put in the flat ground          


  • These machines are processed to be rustproof and moisture proof before delivery.

  • Large mainframes are in nude, while small spare parts and motors are in wooden boxes.

  • All items are in bulk or containers, details will be negotiated by both parts afterwards.



Project Case

Zenith XZM Ultrafine Mill in INDIA

Case Study
A mining company in India intends to produce calcium carbonate powder with fineness of 5-10 micron; Required capacity is 1.0 ton per hour. They had a Raymond mill which can not meet their desired fineness. The feeding size of the raw stone is 12"-14". They have a primary 16"×10" jaw crusher. Based on customer’s situation, we recommended full set of XZM221 Ultrafine mill for their requirement. The mill was installed in 2009 and is running perfectly in India now.

Production Process
Raw material of 12"-14" size is primarily crushed by the client’s jaw crusher down to 2" and then enters our hammer crusher PC400×300, after secondary crushing, it will be less than 0.4", and discharged to bucket elevator. The elevator sends the material to storage hopper, there’s a vibrating feeder under the hopper, the feeder feeds material to main unit of XZM221 mill evenly and continuously. When the material being ground in the mill, the blower blows the powder to classifier, the classifier impeller is rotating at adjustable speed which is controlled from control cabinet, as per client’s requirement, powder less than 10 micron will be separated by classifier, and bigger powder falls down, being reground over and over again. 10micron and less than 10micron powder then go to the cyclone collector with the air from blower and be collected in the cyclone collector. Powder will be discharged from the discharge valve to become the final products. The bag filter will clean the outgoing air to protect the environment.

Get Quote and More info>>>> WhatsApp/WeChat: 86 15737192418








Name of exhibition:  BAUMA CHINA 2018
Duration:  November 27 to 30, 2018
Address:  China Shanghai New International Expo Centre
Booth No.:  E6-510


 Get Quote and More info>>>> WhatsApp/WeChat: 86 15737192418



Customers' Feedback

Customers' Feedback


So far ,there are so many customers use our equipment and rave reviews.





Frequently Asked Questions

  • How is the quality of your machine?

Our products are manufactured strictly according to national and international standard, and we take a test on every grinder before delivery.
If products’quality is not consistent with the description as we described or the promise before you place order, we promise 100% refund.

  • How about price?

We are factory and be able to give you the lowest price than market one, and we have a policy that “ for saving time and absolutely honest business attitude,we quote as low as possible for any customer, and discount can be given according to quantity”.

Get Quote and More info>>>> WhatsApp/WeChat: 86 15737192418

  • Payment Terms and Service?

A. We usually accept T/T, L/C;
B. Our engineer is aviliable to installation machine overseas;
C. The guarantee period of our machine is one year;
D. Spare parts will supply at any time.

Connect Us

Connect Us


In order to recommend the suitable models and supply more complete quotation for you, Send your Requiry Details in the below!



1. Which machine do you need?

(such as crusher, grinder, vibrating screen, vibrating feeder, belt conveyor and other benefication equipment)


2. Which kind of material you are going to process?

Soft stone (dolomite, limestone and others) or hard stone (granite, basalt, river pebble and others) ?


3. What's the production capacity you want?

How many tons or cubic meters per hour?


4. You want only a machine or a complete production line?


And please tell me your email and phone, I will give you factory price with full specification and you will know all details about machine and discount.


0.0927 s.