3D Printer UV Resin Curing Light for SLA DLP 3D Printer 6W Spotlight Silver

Product Overview

Description

UV Resin Curing Light for SLA 3D Printer/DLP 3D Printer solidify photosensitive Resin 405nm UV Resin with 60w Output Affect US Plug

 

Model: 60w Output Affect
6W power but 60W power affect
Type:Highlighting UV Resin Curing Light
wavelength:405nm
input voltage:100-260V
Led type:UV light
Material:high quality aluminum alloy die-casting molding .Pure silicone seal, tempered glass
Weight:600g
life cycle: 10000h
Application area:UV curing, resin curing

 

Feature

· Cold light source, no heat radiation, low surface temperature rise of the illuminated product, to solve the traditional heat injury problem. Particularly suitable for liquid crystal edge sealing, film printing, etc.;

· 

· [Usage] LED UV lamp should be as close as possible to the surface of the cured object. The closer the distance, the better, it should be kept within 0.5-1 cm distance. The irradiation distance too far will seriously affect the curing effect;

· 

· [Scope of use] UV curing (no shadow glue \ ink \ resin film), photochemical catalysis, medical physiotherapy, aging test, UV printing, plastic printing, diazo copier, mobile phone LCD screen and so on.

· 

· [Tips] To achieve the best and best curing results, you must pay attention to two points:

· 

· First, the wavelength of the photocuring agent contained in the UV adhesive must be the same as the wavelength emitted by the UV lamp;

· 

· Second, the UV energy emitted by the UV lamp must meet the energy required to cure the UV glue. The energy of the UV light is proportional to the power of the lamp. (It is best to consult the glue supplier before purchase, the wavelength requirement for UV glue curing).

· 

· High brightness, LED UV light is equal to 10 times of the brightness of traditional UV lamp, 1W is equal to 10W

· Long life, traditional UV lamps will be seriously weakened in 3 months, and will be broken in about 6 months. LED UV lamps can be used for up to 10,000 hours.

· Energy saving and environmental protection, LED UV lamp 1W is equal to 10W brightness, power consumption is only one tenth of traditional UV lamp, does not contain mercury, is environmentally friendly

· Light up quickly, LED UV light can be brightened immediately without waiting and preheating.

· Cold light source, low heat generation, no damage to the surface of the illuminated object, suitable for curing of film and liquid crystal surface