Laser Dark No Cut Transfer A B Paper A4 A3 For Laser Printer with White Toner
- Category: >>>
- Supplier: Shanghai Vision Digital Printing Co. Ltd.
Share on (62534119538):
Product Overview
Description
Product Description
Shanghai Vision New Updated Laser Dark No-Cut Transfer Paper：A Foil and B Paper
A foil and B paper as one set to use.
A foil is transparent film, the matte surface side is the printing side, the back side is smooth.
B paper is the bottom paper (the white coated surface is the transfer side, the side with printed gray VISION is the back)
Advantages
Compatible with OKI white toner printers, such as OKI 8432WT/C711WT(A4)/C941CN(A3)
Achieve amazing vivid colors and perfect transfer effect.
Without cutting and weeding.
Use with transpaprent foil to position clearly.
Achieve amazing vivid colors and perfect transfer effect.
Without cutting and weeding.
Use with transpaprent foil to position clearly.
Application
The transferred fabric requires pure cotton fabric.
It is recommended to choose a fabric with low elasticity and relatively rough surface.
It is recommended to choose a fabric with low elasticity and relatively rough surface.
Process
1.Print: Print your pattern in Mirror Image Mode onto the Matt Side of the A Foil.
2.Transfer B to A：Set the heat press machine 165-175 °C, 60S, heavy pressure.
(1)Heat press:
Place A on the silicone pad with the pattern side facing up. B paper is covered on the A foil. Place a piece of 1cm wide scrip on the blank part between A and B. Then cover it with heat resistant oil paper to complete transfer.
(2)Warm peeling.
Wear heat resistant gloves with both hands to smooth the B paper, and evenly and continuously remove the paper strip and B paper .
3. Transfer A foil to the fabric: the time is adjusted to 10-15 seconds, the temperature and the pressure are unchanged;
(1)Heat press: Put the cloth on the plate, the pattern side is faced down to transfer
(2)Cold peeling: Peel it when the fabric is completely cooled. Pick up a corner of the foil, separate it in a gentle and slow motion. Tear off the foil to complete the transfer.
4.To enhance the firmness, you also can cover a piece of isolation paper for 3-5 seconds.
2.Transfer B to A：Set the heat press machine 165-175 °C, 60S, heavy pressure.
(1)Heat press:
Place A on the silicone pad with the pattern side facing up. B paper is covered on the A foil. Place a piece of 1cm wide scrip on the blank part between A and B. Then cover it with heat resistant oil paper to complete transfer.
(2)Warm peeling.
Wear heat resistant gloves with both hands to smooth the B paper, and evenly and continuously remove the paper strip and B paper .
3. Transfer A foil to the fabric: the time is adjusted to 10-15 seconds, the temperature and the pressure are unchanged;
(1)Heat press: Put the cloth on the plate, the pattern side is faced down to transfer
(2)Cold peeling: Peel it when the fabric is completely cooled. Pick up a corner of the foil, separate it in a gentle and slow motion. Tear off the foil to complete the transfer.
4.To enhance the firmness, you also can cover a piece of isolation paper for 3-5 seconds.
Details Images
Relative products
Company Profile
FAQ
Notes:
1.The temperature and time need to be adjusted according to the different needs of the heat press machine. The recommended temperature is 165-175 ° C and the recommended time is 35-60 seconds. The time cannot be less than 35 seconds. The small and simple pattern transfer can reduce the time by 35 seconds. The time of big and complex pattern transfer needs 60 seconds. The transfer temperature should not be too high. If the temperature is too high, the structure of the coating on the transfer paper will be destroyed, the coating will be softened, then the B paper will not be transferred on A foil completely.
2.After the heat press machine is lifted up, wait for 5 seconds and then peel the B paper. The transfer paper cannot leave the platen. When tearing off the B paper, tear it off evenly and smoothly. Do not stop during peeling, or it will have small dots or lines not completely transferred.
3.When peeling off the A foil, you must wait until the fabric is completely cold. In the process of cold, do not perform other operations on the fabric. Leave it still and let it cool naturally.
4.After peeling off the A foil, on the condition of the same temperature, time and pressure, press the transferred pattern for another 5 seconds to increase the firmness. The pattern without re-pressing will cause pattern fall off when washing.
5.Since the pattern is formed of toner, stretching the fabric will cause the pattern to break. So please do not pull the fabric vigorously. Hand washing is recommended. Do not rub the pattern directly. Do not bleach. Do not soak it for a long time. Dot dry.
1.The temperature and time need to be adjusted according to the different needs of the heat press machine. The recommended temperature is 165-175 ° C and the recommended time is 35-60 seconds. The time cannot be less than 35 seconds. The small and simple pattern transfer can reduce the time by 35 seconds. The time of big and complex pattern transfer needs 60 seconds. The transfer temperature should not be too high. If the temperature is too high, the structure of the coating on the transfer paper will be destroyed, the coating will be softened, then the B paper will not be transferred on A foil completely.
2.After the heat press machine is lifted up, wait for 5 seconds and then peel the B paper. The transfer paper cannot leave the platen. When tearing off the B paper, tear it off evenly and smoothly. Do not stop during peeling, or it will have small dots or lines not completely transferred.
3.When peeling off the A foil, you must wait until the fabric is completely cold. In the process of cold, do not perform other operations on the fabric. Leave it still and let it cool naturally.
4.After peeling off the A foil, on the condition of the same temperature, time and pressure, press the transferred pattern for another 5 seconds to increase the firmness. The pattern without re-pressing will cause pattern fall off when washing.
5.Since the pattern is formed of toner, stretching the fabric will cause the pattern to break. So please do not pull the fabric vigorously. Hand washing is recommended. Do not rub the pattern directly. Do not bleach. Do not soak it for a long time. Dot dry.
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
