Modern design lowest price door bell transformer 8v 12v 24v for wired doorbell chimes

1.Professional Wireless Doorbell Manufacturer,Established in 2012.

 Shipping

1. FedEx/DHL/UPS/TNT for samples, Door-to-Door

2. By Air or by Sea for batch goods, for FCL; Airport/ Port receiving

3. Customers specifying freight forwarders or negotiable shipping methods

4.Delivery Time: 3-7 days for samples; 20-40 days for batch goods

Q: What is a wireless doorbell?

A: A wireless doorbell eliminates the need for internal wiring, can be installed with minimal tools, and the chime box receiver can be placed anywhere within the range of the doorbell transmitter. A wireless doorbell system generally consists of two components: a doorbell transmitter and a chime box receiver. When a visitor presses the wireless doorbell button at the front door, the battery-powered transmitter sends out a signal over a designated radio frequency. The receiver inside the chime box detects this signal and emits a loud electronic tone of the owner;s choosing. If there are several receivers within range of the transmitter, all of them should chime simultaneously.

Q: How to install a wireless doorbell?

A:Please test the operation range between the receiver and transmitter first.

1.Receiver: Plug the receiver into a standard outlet.

2.ransmitter: After making sure the right mounting position, clean the flat area where you want to install the transmitter. Remove one side of the double-sided adhesive tape and stick it to the back side of the transmitter, remove the other side of the tape and stick it to wall, the press it for 10 seconds.

Q: How do I change the sounds on my wireless doorbell?

A: It is very easy to change the sounds of your wireless doorbell. It can be done in seconds with very little effort.

1.Set Ringtone: 55ringtones for you to choose. Press button Forward/Backward on the receiver to choose your favorite ringtone.

2.Enter Pairing Mode: Press the Volume button and Forward button on the receiver at the same time until it makes a ‘Ding-Dong; sound and the indicator flashes. It will exit the pairing mode after 5 seconds automatically. If not completed, try this operation again.

3.Press the button on the transmitter, when the receiverplays the selected ringtone automatically, the pairing is completed.

Q: How do I change the volume on my wireless doorbell?

A: For every press the Volume button, volume cycle plus one, 5 levels total. The first level is silent mode, only indicator flash.

Q: Can I install my doorbell push button outside where it could get wet?

A: Yes, the doorbell push is waterproof (IP55 rating) and is protected from rain showers.