Hot Selling Baby Play Mat Plastic Coating/Lamination Machine
- Category: >>>
- Supplier: Shenzhen Royalstar Mechanical Equipment Co. Ltd.
Share on (62549455210):
Product Overview
Description
Product Description
Baby Play Mat Plastic Coating/Lamination Machine
Play Mats are products made form sticking EPE (pearl cotton) sheet and colored printing PE film with a layer of PE.This is one composite extrusion production line with 2050 mm width specifications, made by one extrusion production line and the auxiliary equipment.
Technological process:Main winding roll - secondary winding- extruding and compounding - cut edge - rewinding.
Main features
validate width: 1500-2050mm.
roller width: 2200mm.
extrusion thickness: thickness evenness 3%.
mechanical speed: maximum 50m/min
screw specification: equivalent diameter of 110mm.
roller width: 2200mm.
extrusion thickness: thickness evenness 3%.
mechanical speed: maximum 50m/min
screw specification: equivalent diameter of 110mm.
the maximum roll diameter:1500mm.
electrical control mode : PLC programmable controller, man-machine interface operation.
drive motor: ac inverter motor.
inverter: ac digital vector control frequency converter.
temperature control mode: thermostat control, 0-400 ℃, the accuracy of 1 ℃
power supply: three-phase 380V,50HZ.
cooling water temperature:13 to 25 ℃ , flow rate:30 m/h, water pressure >0.2 Mpa
compressed air: over 0.6mpa.
extruder heating mode: cast aluminum heating.
electrical control mode : PLC programmable controller, man-machine interface operation.
drive motor: ac inverter motor.
inverter: ac digital vector control frequency converter.
temperature control mode: thermostat control, 0-400 ℃, the accuracy of 1 ℃
power supply: three-phase 380V,50HZ.
cooling water temperature:13 to 25 ℃ , flow rate:30 m/h, water pressure >0.2 Mpa
compressed air: over 0.6mpa.
extruder heating mode: cast aluminum heating.
Application
Related Products
EPE SHEET PRODUCTION AND PROCESSING COMPLETE PRODUTION LINE
---------------------------------------------------------------------------------------------------------------------------------------
EPE LAMINATION MACHINE
It is used to compound a layer of plastic film or aluminum film on EPE sheets. The machine has embossing function. It adopts high temperature oil-electric heating method, and has circular air knife for cutting. The composite material may be embossed or glossy.
EPE CUTTING MACHINE
It is specially used for horizontal and vertical cutting of EPE sheet and coil material. The servo motor control system is adopted to adjust the feeding speed according to the size of the cut product. The required size can be completed at one time.Touch screen interface operation mode makes simple and convenient operation.
EPE RECYCLING MACHINE
This machine is mainly used for recycling EPE wasted products and
make granulation with simple design,operation and high production efficiency. The production line consists of automatic crushing, extrusion, cooling and granulating parts.
After Sales Service
Within 12 months after completing the install and testing.
All life time support maintenance but need pay charge for needed parts, phone support and technical support is free, if an engineer need to be dispatched, the buyer should be pay for the engineer travel and accommodation fee.
Company Introduction
Shenzhen royalstar mechanical equipment co., LTD., founded in 1987, locats in shenzhen citY which is near to HongKong.It specialies in producing aeries of PE foam products making machine.
Our equipment sells well in domestic market, and sets of exports exported to Russia, the Middle East, Africa, southeast Asia and South America and many other countries, by domestic and foreign customers.Since its establishment, the company has continuously developed and innovated, widely absorbed user's opinions, actively improved product quality and after-sales service, and won the support and trust of the majority of new and old customers.
At present, royalstar company has our own production base in Dongguan City .We sincerely hope to join hands with customers at home and abroad to create a better tomorrow!
At present, royalstar company has our own production base in Dongguan City .We sincerely hope to join hands with customers at home and abroad to create a better tomorrow!
Packing & Delivery
Customers
Exhibition show
FAQ
A: We are factory.
Q: How long is your delivery time?
A: Within 45days after the seller receives the down payment.
Q: What is your terms of payment ?
A: Payment terms After the Contract has been signed by both parties, the buyer shall Pay the 30% of the total amount within a week by telegraphic transfer (T/T). testing in the seller factory and before shipment, the balance of the total amount must be paid by T/T.
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
