Share on (62551385268):
Wallpaper glue powder/starch
Wallpaper powder is usually called wallpaper starch. The main ingredient is potato denatured starch.
Brief introduction
The wallpaper glue powder is mainly made of potato starch and high performance plant cellulose as raw material. It is extracted with low carbon environmental protection technology. The product is white flake powder. It can be dissolved in cold water and water solution is white sticky liquid. It is a rare biodegradable and formaldehyde free in the building decoration industry. It is completely non-toxic and harmless. Green and healthy products. Construction viscosity is 2 times that of common glue powder. It can effectively improve the cohesive force of wallpaper and prevent defects such as yellowing, cracking and warping of wallpaper. Special natural mildew resistant factors are added to the human body, which are effective in preventing mildew and bacteria. There is no need to be used with cement in the construction.
Classification and use
Wallpaper powder mainly for starch, wallpaper powder added into the use of glue, its use is: wall paper , if there is no "inner wall seepage" or human destruction, the normal wallpaper construction paste, should not have a falling phenomenon. Using wallpaper to paste wallpaper alone, it can be easily replaced and less damaged wall surface, which can facilitate the next paste.
Wallpaper glue powder parameters:
Appearance | White powder |
Solid content | 100% |
Viscosity | 15000 -18000mPa.s(adhesive:water=1:30) |
PH | 8--9 |
Curing time | 8h |
Tensile strength | 9800(MPa) |
Peel strength | 120(MPa) |
Pot life | 24 months(180g can stick 22-26 m2 wallpaper) |
Film forming time | 4h |
Package | 180g/120g paper box |
Application range | pvc wallpaper/paper wallpaper/non-woven wallpaper |

It has strong paste, non-toxic, until- mildew, made of potato, environment friendly product.Can easy mixing and quick dissolve in cold water, suitable for various different kinds of wallpaper.such as common wallpaper, glass fiber wall covering, weaving wallpaper, thick and heavy wallpaper and metal wallpaper etc.

Mix the adhesive powder and water at 1:30. Stir to achieve a smooth consistency. Leave mixed product for approximately 5 minutes. After that, stir it again and it is ready-to-use.
Apply the adhesive to the wallpaper, follow wallpaper's instructions. Starting from the top, roll paper in place, taking care to roll out air bubbles. Immediately remove excess adhesive and any adhesive on pattern side with damp cloth.
After dissolving adhesive may be stored for 8 days in closed bucket. Stir very well before use when was stored more than 1 day.

It requires wall neat clean, dry, no solid, no hole, strong and no dust. First put the powder into percent clean water, churn half minute make sure the powder completely absorb, after three minute then churn. Use the brush to paste mixed glue on finished cutting wallpaper, full of the surrounding, fold and stress two sides five or six minutes so that the paste completely infiltrate the back of paper then it can paste on wall. First should put the wallpaper's top, use drawknife from up and down, from middle to two sides extrude air bubble. Use wet towel take the extra paste out of the surface wallpaper.

Brush the paste on the back of the wallpaper.Be sure to cover the entire back of the paper including all edges.Let it sit for 5-6 minutes so that it is absorbed by the paper,then apply the paper to the wall.














New products from manufacturers at wholesale prices