Electric Forklift Part Throttle Control Accelerator ET 126
- Category: >>>
- Supplier: Yueqing Wodu Electric Co. Ltd.
Share on (62551594376):
Product Overview
Description
Product Description
Electric Forklift Part Throttle Control Accelerator ET-126
Specifications:
* Input voltage (volt): 24-48V DC
* Signal output: 0-5V
* Maximum throttle output: 5.3V
* Minimum throttle output: 0V
* Maximum deadband at zero throttle: 10 degrees
* Maximum deadband at full throttle: 10 degrees
* Forward/Reverse current: 1.5A max
* Symmetrical throttle response in both directions
CURTIS ET-126 MCU throttle assemblies provide an analog 0-5V output proportional to throttle position for interfacing with CURTIS
PMC motor speed controllers.
This new MCU version replaces the old ET-126 throttle. They are functionally identical, but the MCU version has a microprocessor,
providing more accurate speed signal output.
Key Features:
* Model: ET-126 MCU
* Hall effect sensors and solid state MOSFET contactor drivers minimize moving parts, thereby increasing reliability and Mean
Time Between Failure.
* Symmetrical throttle response in both forward and reverse directions ensures smooth, concise acceleration and deceleration in
both directions.
* Minimal deadband areas at both zero and full throttle positions eliminates hesitation when beginning to accelerate or
decelerate.
* Environmental protection of major components through an epoxy layer over the circuit board assures operation in harsh
environmental conditions.
* Wig-wag type throttle returns the throttle to neutral for convenience and safety.
* Input polarity protection to ensure no damage occurs to the throttle if it is incorrectly wired.
* Easy to install.
* Input voltage (volt): 24-48V DC
* Signal output: 0-5V
* Maximum throttle output: 5.3V
* Minimum throttle output: 0V
* Maximum deadband at zero throttle: 10 degrees
* Maximum deadband at full throttle: 10 degrees
* Forward/Reverse current: 1.5A max
* Symmetrical throttle response in both directions
CURTIS ET-126 MCU throttle assemblies provide an analog 0-5V output proportional to throttle position for interfacing with CURTIS
PMC motor speed controllers.
This new MCU version replaces the old ET-126 throttle. They are functionally identical, but the MCU version has a microprocessor,
providing more accurate speed signal output.
Key Features:
* Model: ET-126 MCU
* Hall effect sensors and solid state MOSFET contactor drivers minimize moving parts, thereby increasing reliability and Mean
Time Between Failure.
* Symmetrical throttle response in both forward and reverse directions ensures smooth, concise acceleration and deceleration in
both directions.
* Minimal deadband areas at both zero and full throttle positions eliminates hesitation when beginning to accelerate or
decelerate.
* Environmental protection of major components through an epoxy layer over the circuit board assures operation in harsh
environmental conditions.
* Wig-wag type throttle returns the throttle to neutral for convenience and safety.
* Input polarity protection to ensure no damage occurs to the throttle if it is incorrectly wired.
* Easy to install.
Packing & Delivery
FAQ
Q: How to confirm a spare part ?
A: Usually, we confirm a spare part according to following details:
(1) Applied forklift model and forklift brand.
(2) Model number of a part.
(3) Photos of a spare part.
Q: How long is your delivery time?
A: Generally, 1-2 days for normal products.
A: Usually, we confirm a spare part according to following details:
(1) Applied forklift model and forklift brand.
(2) Model number of a part.
(3) Photos of a spare part.
Q: How long is your delivery time?
A: Generally, 1-2 days for normal products.
Q: Any service about spare parts ?
A: Based on clients' enquiry, we supply correct products with photos.
Q: How to do the order and payment ?
A: Please check below details for your reference.
(1) We send an order to you on Alibaba, then you transfer payment by Credit Card or T/T.
(2) Please tell us your PayPal account, then we send you an invoice by PayPal.
(3) After you confirm an order, we will send you an official invoice for your payment.
A: Based on clients' enquiry, we supply correct products with photos.
Q: How to do the order and payment ?
A: Please check below details for your reference.
(1) We send an order to you on Alibaba, then you transfer payment by Credit Card or T/T.
(2) Please tell us your PayPal account, then we send you an invoice by PayPal.
(3) After you confirm an order, we will send you an official invoice for your payment.
Contact Us
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
