photoelectric correction controller
- Category: >>>
- Supplier: Wenzhou Shengjing Machinery Co. Ltd.
Share on (62555484342):
Product Overview
Description
photoelectric correction controller
Product Description
Product Introduction
Computer Rectifying Series
GB-6A series photoelectric computer rectifying device is the latest developed series product of our factory.The product adopt the international new device MCU and apply the micro-computer technology to make the product use simply and own good-looking appearance,high reliability,good stability,strong anti-interference.In addition, it is of superior cost performance. It matchs the synchronous motor,and widely used in paper making , printing and dyeing,packaging and all kinds of mechanical equipment.
GB-6A series photoelectric computer rectifying device is the latest developed series product of our factory.The product adopt the international new device MCU and apply the micro-computer technology to make the product use simply and own good-looking appearance,high reliability,good stability,strong anti-interference.In addition, it is of superior cost performance. It matchs the synchronous motor,and widely used in paper making , printing and dyeing,packaging and all kinds of mechanical equipment.
Main Features
Can work manually or automatically
Can work on the way of edge and line
Input by single or double magic eye
Response speed can be adjusted
Support corrective actuator return function
With limit input
Correction precision is less than 1mm
drive single-phase synchronous motor
Can work manually or automatically
Can work on the way of edge and line
Input by single or double magic eye
Response speed can be adjusted
Support corrective actuator return function
With limit input
Correction precision is less than 1mm
drive single-phase synchronous motor
High Speed Type
Company Information
FAQ
1.The power supply for eliminating devices is 220 AC per hour. 380 V are strictly prohibited. Wiring shall be used when used end reliably with machine metal body and ground connection otherwise
easy damage eliminator.
easy damage eliminator.
2.The grounding end of discharge rod must be grounded reliably and electro-acupuncture must be
perpendicular to electrostatic objects.The closer distance is, the better electrostatic effect is.
perpendicular to electrostatic objects.The closer distance is, the better electrostatic effect is.
3.When machine works, operator must not contact or close to high voltage output end-point electro acupuncture.
4.High voltage output lines shall be separated from ground lines and cannot be near any metal.
5.When cleaning maintenance, you must cut off power.
6.Discharge body and fixed bracket should be often cleaned with gasoline.
7.During transportation storage and use no two leaching or contacting corrosive objects shall be ![]()
allowed.
8.In use, if sparks are detected or no spark output is found, typically 630 VIf the capacitor failure is due to failure, replace 500 V and 1.5uF capacitor, which is normal recovery.
Contact Us
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
