BWD Cycloidal Gear Motor Speed Reducer Gearbox Right Angle T Shape Gear Box Reducer

Share on:


Price:$700.00 - $1,000.00
Price in USD:Details

Quantity:


Product Overview

Description


Product Description

Cycloidal gear reducer is a principle adopted K-H-V Planetary Gear less innovative gear. Its transmission process as follows : input shaft equipped with a 180-degree dislocation of the double eccentric sets, replaced with two eccentric turn as a roller bearing arm, the formation of H-, two cycloid round hole at the center shall uplink Eccentric Roller Bearings arm, which cycloidal gear needle round and meshing phase, comprising a difference of the teeth meshing with the gearbox.

Type
stage
Model
Ratio
Nominal Power (KW)
Nominal Torque(N.m)





X/B Series Cycloidal Reducer






Single reducer
B09/X1






           9-87
0.55-0.18
26-50
B0/X2
1.1-0.18
58-112
B1/X3
0.55-0.18
117-230
B2/X4
4-0.55
210-400
B3/X5
11-0.55
580-1010
B4/X6/X7
11-2.2
580-1670
B5/X8
18.5-2.2
1191-3075
B6/X9
15-5.5
5183-5605
B7/X10
11-45
7643
Type
stage
Model
Ratio
Nominal Power (KW)
Nominal Torque(N.m)






X/B Series  Cycloidal reducer







Double reducer
B10/X32







         99-7569
0.37-0.18
175
B20/X42
1.1-0.18
600
B31/X53
2.2-0.25
1250
B41/X63
2.2-0.25
1179-2500
B42/X64
4-0.55
2143-2500
B52/X84
4-0.55
2143-5000
B53/X85
7.5-0.55
5000
B63/X95
7.5-0.55
5893-8820
B74/X106
11-2.2
11132-12000
B84/X117
11-2.2
11132-16000

Main Features

All planetary cycloidal reducer rotating device can be divided into three parts:input part,deceleration part and output part.

Dislocation on the input shaft is equipped with a 180℃ of double eccentric sleeve,equipped with two ball bearings on the eccentric sleeve,the formation of H two cycloid gear center hole is the eccentric sleeve on the turning arm bearing raceway,and by a groud of cycloid gear and pin gear ring of gear meshing,less bad tooth meshing reduction mechanism to form,(in order to reduce friction,in small ratio of speed reducer,the needle with needle teeth on the gear set).
When the input shaft with eccentric sleeve rotation for a week,as a result of the cycloid gear tooth profile curve characteristics and restricted by needle on the gear teeth,the movement of the cycloid gear becoming both revolution and rotation of the plane movement,and input shaft are
made for a week,eccentric sleeve also turn the week,cycloid gear in the opposite direction around a big tooth difference reduction is obtained, then with the help pf W output mechanism,the cycloid gear rotates at low speed movement through the pin shaft,passed to the output shaft,low output speed can be achieved.


The Designation of Cycloidal Reducers

Example: BL(E)D41-1225-0.37-W
B: B series cyclo drive gearbox
L: Vertical mounted with flange, Shaft downward
(E): None-one stage, E-two stage, S-three stage
D:Standard electric motors
41: Model number 41
1225: Speed Reduction Ratio

0.37: Electric motor power:0.37kw
W: Mounting way.



Basic Parameters

Power range: 0.25 - 90kW

Output speed(r/min): 0.011 - 161
Output Torque(N.M): Top to 22920N.m


All models of this cycloidal motor reducer are
BW0、、BWD0、BW1、BWD1、BW2、BWD2、BW3、BWD3、BW4、BWD4、BW5、BWD5、BW6、BWD6、BW7、BWD7、BW8、BWD8、BW9、BWD9、BL0、BLD0、BL1、BLD1、BL2、BLD2、BL3、BLD3、BL4、BLD4、BL5、BLD5、BL6、BLD6、BL7、BLD7、BL8、BLD8、BL9、BLD9、
BWE20、BWED20、BWE30、BWED30、BWE31、BWED31、BWE41、BWED41、BWE42、BWED42、BWE52、BWED52、BWE53、BWED53、BWE63、BWED63、BWE74、BWED74、BWE85、BWED85、BWE95
BW12、BWD12、BW15、BWD15、BW18、BWD18、BW22、BWD22、BW27、BWD27、BW33、BWD33、BW39、WD39、BW45、BWD45、BW55、BWD55、
BL12、BLD12、BL15、BLD15、BL18、BLD18、BL22、BLD22、BL27、BLD27、BL33、BLD33、BL39、LD39、BL45、BLD45、BL55、BLD55、
BWE1512、BWED1512、BWE1812、BWED1812、BWE2212、BWED2212、BWE2215、BWED2215、BWE2715、BWED2715、BWE2718、BWED2718、BWE3318、BWED3318
XW0、XW1、XW2、XW3、XW4、XW5、XW6、XW7、XW8、XW9、XW10、XW11、XW12
XWD1、XWD2、XWD3、XWD4、XWD5、XWD6、XWD7、XWD8、XWD9、XWD10、XWD11、XWD12
XL0、XL1、XL2、XL3、XL4、XL5、XL6、XL7、XL8、XL9、XL10、XL11、XL1
XLD1、XLD2、XLD3、XLD4、XLD5、XLD6、XLD7、XLD8、XLD9、XLD10、XLD11、XLD12
XWED20、XWED32、XWED42、XWED53、XWED63、XWED74、XWED84、XWED85、XWED95、XWED106、XWED128
XLE20、XLE32、XLE42、XLE53、XLE63、XLE74、XLE84、XLE85、XLE95、XLE106、XLE128
XLED20、XLED32、XLED42、XLED53、XLED63、XLED74、XLEDK84、XLED85、XLED95、XLED106、XLED128
XJ0、JXJ0、XJ1、JXJ1、XJ2、JXJ2、XJ3、JXJ3、XJ4、JXJ4、XJ5、JXJ5、XJ6、JXJ6、
XJL0、JXJL0、XJL1、JXJL1、XJL2、JXJL2、XJL3、JXJL3、XJL4、JXJL4、XJL5、JXJL5、XJL6、JXJL6、XJE10、JXJE10、XJE20、JXJE20、XJE31、JXJE31、XJE41、JXJE41、XJE42、JXJE42、XJE52、JXJE52、XJE53、JXJE53、XJE63、JXJE63、
XJLE10、JXJLE10、XJLE20、JXJLE20、XJLE31、JXJLE31、XJLE41、JXJLE41、XJLE42



Reduction ratio mainly is 7,9,11,17,23,29,35,43,59,71,87,99,121,187,289,391,493,595,731,841,1003,1225,1505,1849,
2065,2537,3481,4189,5133,7569.


Paint Color: Various
Material: Rugged cast iron or ductile housings
Lubrication: Grease or oil lubricated models available.
Seals: Nitrile material, dual lipped, double output seals available.
Working: 24 hours continuous available and shaft forward reverse
Reducer Reduction: Internal planetary gear mechanism with trochoidal curved tooth profile.
Atmosphere: Well ventilated location, free of corrosive gases, explosive gases, vapors and dust



Application :

• Conveyors • Sawmills and Wood Mills • Food Machinery • Wastewater Treatment
• Mixers • Steel Mills • Automotive Plants • Construction Equipment
• Paper Mills • Recycling Machines • Poultry Plants • Processing Plants
• Oil Press Machine • Rotary Feeder


What are our unique advantages in making Cycloidal Reducers your choice factory infrastructure investment?


we can help you:

● Providing proper type gearbox and combined gearbox to meet your application needs;
● Better managing maintenance cost and lifting operation efficiency;
● Improving production capacity and boosting economic profitability.


cycloidal gear reducer is widely used in many industries such as Textile manufacturing and food industry. it is small but very good quality.



This kind of gear reducer can divided into three parts, the input , the reduction part and the output shaft. There is a double eccentric locking collars in the input part. when input shaft turns a round, the eccentric locking collars will also turns a round so that transfer to the reduction part. to make the output shaft turns. so it make torques. Efficiency can get to 95% .



Usually, there are two mounting way and this is vertical mounting.It can be widely used in industry of Coal, steel, machinery, chemical, textile, mixer etc. This can have one stage, two stages and three stages reduction gear. If you want it with flange, we can make. the price with flange or without flange is same.




How to choose a proper type of Gearbox :
It is recommended that as much as possible of the following information be given in the enquiry or order so that a check can be made and advice given on the most suitable size of Worm Speed Reducer for any application.
1.Type of prime mover.
2. Horse-power of prime mover.
3. Output torque required from driven member.
4. Input speed of gear unit.
5. Output speed of gear unit.
6. Configuration of drive required and shaft disposition.
7. Total daily hours of running. If running is intermitte
To get the type-choose reference,please contact our technical rep or sales rep .



Characteristics:

1.Cycloid reducer big reduction ratio, high efficiency: a reduction gear ratio is 9~87, the two-stage reduction gear ratio is 121 ~ 5133, multistage combination can reach tens of thousands, and the needle tooth meshing line type rolling friction, the meshing surface no relative sliding, so a reduction efficiency of 94%.
2.Pin wheel reducer smooth running, low noise: the teeth contact at the same time when in operation, the coincidence degree high, stable running, strong overload capacity, low vibration and noise, a variety of models, small noise.
3. The use of reliable, long life: because the main part is made of high carbon alloy steel quenching (HRC58-62), and then grinding, and cycloid gear and pin gear set mesh transfer to the pin gear form rolling friction pair, friction coefficient is small, so that the meshing zone no relative sliding, wear small, so durable.
4. Compact structure, small volume: compared with other reducer with the power of the above weight, small volume 1/3, as is the planetary transmission, the input shaft and the output shaft in the same axis, in order to obtain the smallest possible size.


WHY SHOULD YOU CHOOSE CYCLOIDAL DRIVE OVER OTHER TYPES

Cycloidal gear drives are unique and are still unsurpassed where drive technology is concerned. The cycloidal speed reducer is superior to traditional gear mechanisms, since it only operates with rolling force and is not exposed to shear forces. By comparison with gears with contact loads, Cyclo drives are more resistant

and can absorb extreme shock loads by means of uniform load distribution over the power transmitting

components. Cyclo drives and cyclo drive geared motors are characterized by their reliability, long service life

and outstanding efficiency, even under difficult conditions.

Characteristic

Premier in-line drives as both a reducer and gearmotor

Quiet, efficient and reliable operation with high torque density and compact sizes

Interchangeable cast iron housings in foot, flanged or face mount configurations

Available free-shaft, quill hollow shaft, C-face adaptors, shovel base, and top-mount inputs

Mininimal vibration, low noise, low backlash and extended operational life

Our Company

Xuzhou Yinxin Electromechanical Facilities Co. Ltd

Xuzhou Yinxin Electromechanical Equipment Co., Ltd.is a gift enterprise integrating development, design, production and sales,Main promoting products include reducer motor,water pump,construction machinery and parts,bearings,hardware and electrical equipment,plastic products,Labour protection appliance.Our company always follow the operation concept which contains people-oriented, innovation as the soul,be prepared for danger in times of peace, unremitting......

Application area
Certifications
Sales territory
Packing & Delivery
Packaging
Size
500 (L) * 500 (W) * 400 (D)
Weight
1.2 T



Packaging Details
The normal package is wooden box(Size: L*W*H). If export to european countries,the wooden box will be fumigated.If container is too tigher,we will use pe film for packing or pack it according to customers special request.
Packaging
Size
500 (L) * 500 (W) * 400 (D)
Weight
1.2 T



Packaging Details
The normal package is wooden box(Size: L*W*H). If export to european countries,the wooden box will be fumigated.If container is too tigher,we will use pe film for packing or pack it according to customers special request.
FAQ

Q1: Are you trading company or manufacturer ?

A: We are a manufacturer in Jiangsu China.welcome to our factory to have a visit.

Q2: How we select models and specifications?

A:You can email us the series name & code (for example: WJ series worm reducer) as well as requirement details, such as motor power, output speed or ratio, service factor or your application...as much data as possible. If you can supply some pictures or drawings, it is better.

Q3: How is your price? Can you offer any discount?

A: We will give the best price we can base on your needs and the quantities.

Q4: How long should I wait for the feedback after I send the enquiry?

A: Within 12 hours.

Q5: What is your product warranty period?

A:We offer one year warranty since the vessel departure date left China.

Q6: What industries are your gearboxes being used?

A:Our gearboxes are widely applied to metallurgical equipment, mining equipment, automation equipment, food machinery, packaging equipment, tobacco equipment and so on.


0.0611 s.