Manufacturing Compression Molding Insulation Plate SMC Mould
- Category: >>>
- Supplier: Taizhou Hungyan Aoxu Mould Technology Co. Ltd.
Share on (62567770039):
Product Overview
Description
Manufacturing Compression Molding Insulation Plate SMC Mould
We produce quality SMC MOULDS!
Our advantages of the mould have long shelf life, stable quality, high precision, and reasonable design. Welcome to us have a visit(Leila Mob/WhatsApp/Wechat:+86 13606826958)!
SMC is a sheet-shaped molding material prepared by impregnating a fiber or a chopped fiber mat with a resin paste and covering the polyethylene film on both sides, and belongs to the range of the prepreg. SMC has high molding efficiency, good surface finish, good dimensional stability, short molding cycle and low cost. It is suitable for mass production and is suitable for the production of thin-walled products with small cross-section changes. It has been obtained in the production of GFRP automotive parts. widely used. At present, in the CFRP molding process for vehicles, SMC is mainly used for the production of sheet-like chopped fiber composite materials. Due to the discontinuity of the fibers, the strength of the products is not high, and the strength has the characteristics of in-plane isotropic. The wettability of carbon fiber in the resin paste is an important issue for the SMC process. The necessary surface treatment of the carbon fiber and the use of a suitable wetting and dispersing agent can effectively improve the wettability and uniformity of the carbon fiber in the resin paste.
Our Services
Insulation Plate SMC Mould
1.Quote | According to sample, drawing and specific requirement. |
2.Discussion | Mold material, cavity number, price, runner, payment, etc. |
3.S/C Signature | Approval for all the items |
4. Advance | Pay 40% by T/T |
5.Product Design Checking | We check the product design. If some position is not perfect, or can not be done on the mould, we will send customer the report. |
5.Mould Design | We make mould design on the basis of confirmed product design, and send to customer for confirmation. |
6.Mold Tooling | We start to make mold after SMC mould design confirmed |
7.Mold Processing | Send report to customer once each week |
8.Mold Testing | Send trial samples and try-out report to customer for confirmation |
9. Mold Modification | According to customer’s feedback |
10.Balance settlement | 60% by T/T after the customer approved the trial sample and mould quality. |
11.Delivery | Delivery by sea. The forwarder can be designated by your side. |
Sample Room
Our Factory
Package & Shipping
The main application components include class:
(1) Suspension parts: front and rear bumpers, dashboard, etc.
(2) Body and body parts: body shell, hard shell roof, floor, door, radiator grille, front plate, spoiler, luggage compartment cover, sunshade, fender, engine cover, large Lamp reflectors, etc.
(3) Lower engine cover components: air conditioner housing, air hood, intake pipe cover, fan guide ring, heater cover, water tank component, brake system component, battery bracket, engine sound insulation plate, etc.
(4) Interior decoration components: door interior panels, door handles, instrument panels, steering lever components, mirror frames, seats, etc.
(5) Others: such as electrical parts such as pump covers and drive system parts such as gear sound insulation boards.
Among them, especially bumpers, roofs, front face parts, engine covers, engine sound insulation panels, front and rear fenders, etc.
Mould Maintenance
1.Before production
Clear the dust, oil and rust of the SMC mould, and remove the dirty on the surface before installing the mould into injection molding machine.
Use air gun or rag, detergent or alcohol to clean the oil on the mould surface.
Check the mold's cooling channel to ensure smooth water passage.
Check whether the arc on the mould gate sleeve is damaged, and whether there are any remaining foreign matter. If necessary, clean it up.
Moving parts: such as thimbles, springs, hydraulic cylinders, sliders. Check whether there is rust, bending, or fracture, and make sure the movement must be smooth.
2.During production
The moulds produced on the machine are inspected and maintained daily.
Check the mould guide post, guide sleeve, and sliders for damage and foreign matter on them, and refuel them once a day.
Clean the mould parting surface and the foreign matter in the exhaust groove, oil stains, and wipe it with air gun or rag, detergent or alcohol once a day.
3.After production
Inspect each part of the mold to see if there is any damage.
Clean the greasy dirt on the parting surface and the debris in the mold cavity, and spray with anti-rust agent.
Blow off the water remaining in the cooling water channel.
4.Precaution
Always wear labor protection supplies when maintaining the mould. Heavy objects must be operated with a crane. It is strictly forbidden to lift the mould directly by hand to prevent inquiry to the limb.
The rust prevention of the mold is necessary. After the mould is maintained, special attention should be paid to the rust prevention action of the mould. The remaining water in the water channel must be dried with an air gun.
Too much lubricating oil does not bring better lubricating effect, just the right amount.
When the mould is installed and maintained, pay attention to numbers and directions of the inserts and other components. Do not install them incorrectly. Check whether the screws are completely used up and tighten them diagonally when installing the screws.
FAQ
Why choose us? The Advantage of Aoxu Mould:
1. For Insulation Plate SMC Mould: Good Quality, Long life, repair free if technology problem.
2. For Service: Prompt response within 24 hours, short delivery time
3. For Price: Best or Reasonable price.
Our after-sale service
1.During Mould Manufacturing, we will offer update mould picture or video to customer every week .
2.When mould test, we will send video and photos.
3.Beforedelivery, packing video and photos(wooden case, painted with antirust) will be both offered.
4.If mould stay in our factory to production ,life warranty.
Contact us
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
