One Component High elasticity Polyurethane waterproofing coating
- Category: >>>
- Supplier: Shandong Xika New Energy Co. Ltd.
Share on (62582895061):
Product Overview
Description
Product Description
Waterborne polyurethane waterproofing coating is a kind of elastic waterproofing coating material which is formed by single component polymer liquid reaction curing.The product does not contain solvents, cold construction, non-toxic tasteless, has good cohesiveness and waterproofness, base level of cement and concrete, stone, metal products, has strong adhesive force, products of stable chemical properties, can withstand the sunlight for a long time, high strength, elongation, good elasticity, waterproof effect is good, the production technology in the domestic leading level, is the replacement of the solvent type of polyurethane.
Product Features
1, can be in the wet foundation construction.
2. The coating is tough, high elastic, water and high temperature resistant.
3. Single component, simple construction.
4. Strong adhesion and good elongation.
5, non-toxic, harmless, no radiation, environmental protection products.
2. The coating is tough, high elastic, water and high temperature resistant.
3. Single component, simple construction.
4. Strong adhesion and good elongation.
5, non-toxic, harmless, no radiation, environmental protection products.
Product effect
Product Application
Waterproofing for factory buildings, kitchens, toilets, roofing, inner and outer walls, tunnels, Bridges, culverts, etc.
1. The base surface must be smooth, firm, oil-free, dust-free and water-free, and the unevenness should be leveled.
2. Open the drum and stir the paint evenly (if the paint has precipitation, it is normal).
3, with a brush or roller will paint directly on the surface, before and after the time should be staggered brush, a brush can not
be coated too thick, can not miss brush.
4. A layer of glass fiber cloth or mesh cloth should be added to the node according to the relevant specifications.
2. Open the drum and stir the paint evenly (if the paint has precipitation, it is normal).
3, with a brush or roller will paint directly on the surface, before and after the time should be staggered brush, a brush can not
be coated too thick, can not miss brush.
4. A layer of glass fiber cloth or mesh cloth should be added to the node according to the relevant specifications.
Product packaging
Matters need attention
1, 0℃ below or in the rain can not be constructed.
2. The construction environment shall be ventilated as far as possible, and the coating shall be uniform as far as possible, and
the cutting shall not be too thick or too thin.
3, ensure the thickness and dosage, can not cut corners.
4, finish the waterproof layer should be a protective layer.
2. The construction environment shall be ventilated as far as possible, and the coating shall be uniform as far as possible, and
the cutting shall not be too thick or too thin.
3, ensure the thickness and dosage, can not cut corners.
4, finish the waterproof layer should be a protective layer.
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
